cant read edc17c46

[fricker]

HI, have dead, before edited ecu , dpf was removed how i se and 4 resistors was soldered how i se on board
03L-906-018-CGL

its edc17c46 TC 1767 with TP but i cant connect to them
mpps18 no connection on bench
ktag not connect to
kess same no connection micro wakeup error , ecu data error to , id dont read
galetto4 on tp show some digits and not supported , on boot no connection

have tried 4x1kohm , 2x1kohm+2.2kohm, 3x1kohm
tried 3 wires on ktag and kess and resistors to

i use socket connection not bdm, dont have adapter
power 12-14v 2a all tried , its take about 1.1-0.9A

what i do wrong ?

[TuningInside83]

Fgtech reads and writes without problems by welding 4 resistances.
I had trouble reading with ktag instead

[ahadi]

HI, have before edited ecu , dpf was removed how i se and 4 resistors was soldered how i se on board
Labels: 03L-906-018-CGL.clb
Control Module Part Number: 03L 906 018 ML HW: 03L 906 018 DN
engine CGLB
its edc17c46 TC 1767 with TP but i cant connect to them
mpps18 no connection on bench
ktag not connect to
kess same no connection micro wakeup error , ecu data error to , id dont read
galetto4 on tp show some digits and not supported , on boot no connection

have tried 4x1kohm , 2x1kohm+2.2kohm, 3x1kohm
tried 3 wires on ktag and kess and resistors to

i use socket connection not bdm, dont have adapter
power 12-14v 2a all tried , its take about 1.1-0.9A

what i do wrong ?

There’s problem in ecu or you [emoji6]


Sent from my iPhone using Tapatalk

[bersch8688]

Try Protocol Ktag P199 or P269
Dont search in Ktag in Cars -> Search in Protocol list!!!

[fricker]

Fgtech reads and writes without problems by welding 4 resistances.
I had trouble reading with ktag instead

Fg read it by TP but show not supported , shall be TP level to hight

[fricker]

Try Protocol Ktag P199 or P269
Dont search in Ktag in Cars -> Search in Protocol list!!!

yes i have tried with 2.23v p199 and p269 but no connection at all and with kess same , dont read ID and ECU TOOLS no connection to , backup read connection filed to micro wakaup error

[fricker]

can be some problem on board

[bersch8688]

I would say your ECU is Bricked
When Kess cant read ID and you cant connect Bootmode to ECU ---> DEAD!!!

[kospoz]

car starts now?

[fricker]

car starts now?

ecu was dead i just have tried to get backup from it