View Full Version : Mercedes GLA dash dead after calibration
Ocin
10th January, 2019, 03:21 PM
Hi,
I have a problem with this dash after calibration.
I remove coil put smok can filter, change data of 95640, I put dash back in car now dash is dead (no light).
I remove can filter put back coil, but no change dash doesn't light up ...
I check solder of eprom. no change ...
I check dump no problem.
If someone have an idea ?
cheers
mikkhh
10th January, 2019, 05:09 PM
coil intact ? maybe you readed original eeprom wrong ? eeprom soldered right way? eeprom you can read write with clip on this car
Nicolas9
10th January, 2019, 06:56 PM
Check Dash fuse
Check dash connector
Ocin
10th January, 2019, 10:05 PM
coil intact ? maybe you readed original eeprom wrong ? eeprom soldered right way? eeprom you can read write with clip on this carI checked: coil is broken I think I've overheating while desoldering . I must find another one to test without can filter.
Dump is OK, I always read eprom 2 times and compare both dump before programming new value.
Eprom soldered right way.
I found a capacitor partially desoldered, when I wanted to remove screen without dismantle needles I think I ripped the capacitor.
I resolder capacitor but no changes...
Thanks guys
Envoyé de mon LYA-L29 en utilisant Tapatalk
mikkhh
10th January, 2019, 11:44 PM
maybe bad filter? What kind of filter you used?
bersch8688
11th January, 2019, 06:35 AM
Check Fuse for Cluster!
Was the same problem by me on W221, put the Can Blocker wrong into Dash and the fuse burned in Fuse system from Car
Aislingob
11th January, 2019, 07:50 AM
Check Fuse for Cluster!
Was the same problem by me on W221, put the Can Blocker wrong into Dash and the fuse burned in Fuse system from Car
How old is the GLA Mercedes ?
Ocin
11th January, 2019, 10:16 AM
maybe bad filter? What kind of filter you used?
It's smok RH can filter, I used them sometimes never had any problem.
LED on can filter light up.
I will check dash fuse.
it's 2014 GLA.
thank you guys for help
Nicolas9
12th January, 2019, 11:50 AM
It's smok RH can filter, I used them sometimes never had any problem.
LED on can filter light up.
I will check dash fuse.
it's 2014 GLA.
thank you guys for help
Did you fix it?
Ocin
12th January, 2019, 02:18 PM
Not solved yet
Envoyé de mon LYA-L29 en utilisant Tapatalk
Ocin
14th January, 2019, 10:03 AM
solved, I change capacitor and repair a litle track near capacitor, I've not seen the first time ...
many thanks guys for your help !
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.