Accord Hybrid 03-07 Cluster need to renew

[mann357]

This is my first time posting a question. Thanks in advance.
A customer brought two hybrid Accord clusters and I used the bad one to find out where to solder from the back without removing the needles. I guess I read and wrote to it wrong and screwed up the bin. Now I'm getting a '-3101' on the display and the mls are the same. I need 84115m if possible. This is different because it's a 'hybrid' I'll add a pic of the back to help identify it.
586372586373

[Cazalvalf]

Hello mann, well i don't know if it will do for you, but i found this info yesterday while i was looking for some accord 2007 2.4L petrol motor bin file because mine is corrupted too. (do you have this bin file?)

Read this thread, there's an accord 06 bin file with a cluster like yours. Report if it worked for you.

https://www.digital-kaos.co.uk/forums/showthread.php/244169-Honda-Accord-2006-mileage-help

[epd1221]

Why dont you post bin file so we can see and help out what you have. If you have original file even better

[mann357]

Ok I just got my digiprog connected to my pc to retrieve the file. I'm learn this as we go.
I also hope to have reversed the problem I created by correcting what I thought were miles, to the values they were before I started. I'm hoping that works. I will go to the customer again tomorrow.

Cazalvalf Thanks for the link. I think that is the right cluster. It may come in helpful but I haven't tried the bin.

I can't upload the file. It's giving 'file error'. it's an 'eep' extension not a bin and eetool is in German.???

[mann357]

I have two clusters from an 05 or 06 Accord 'Hybrid' 6v. I didn't save the original bins. Then wrote milage to both screwing up both clusters and the milage didn't change. I'm not 100percent that they are 93c56 or 93c66. One with 104k and the original with 84k and the milage seems to be written at 0E0 0F0. The file in the link you post Cazalvalf have 82k written at 1A0 1B0. So I don't think it will work. The file I uploaded is right except it should have 84115 and not 104449. It is screwed up because I wrote to it incorrectly.

One more question is my process. Am I correct to read the files from the digiprog with eetool then load the 'eep' file with Codiprog to save as bin?

Thanks

[vageric]

you can try this file for mileage.
but dont know if file itself is ok.

[mann357]

you can try this file for mileage.
but dont know if file itself is ok.

Thanks for your help and reply. I put that bin on the cluster and I'm sure it has the correct mls because the bin from the original say the SAME at E0 F0. Now I need to find out how to correct my mistake. I used the wrong settings to enter the mls on both and got an error on the screen saying -3101. I will go to the shop to test it tomorrow, well later today if they are open.
I found two accord bins, here on DK, that store mls at E0 & F0. I may try them too. TTYL
Thanks again

[mann357]

Ok i got another cluster for the same accord. 5th vin N, 3.0L Hybrid, 4dr. 78100 SDR A000
It has 142296 and needs 84115.
When I read this with digiprog accord C66 I get 2535mls???
VEGERIC THE CORRECTION YOU DID ON THAT BIN WORKED but looks different then this working one.

[mann357]

I found out there are two different Hybrid clusters, SDR A000 and SDR A100 and the bins is not interchangeable. One has an analog dimmer and the other is digital among other things.
VEGERIC When I test the bin you modded it worked fine, Thanks again. After purchasing another SDR A000 I had my friend to correct the mls with his DSPIII+ because the DProg3 looks confusing when doing these hybrids. The DProg3 will backup and restore it no problem or even manually mod it. Now I'm looking to buy another tool. Any recommendations would be appreciated.
I did learn a lot searching the forums and appreciate them much. Here's the final bin for the A000 with 84160mls.