PDA

View Full Version : Fiat Spider - Mazda MX5-SRS N243 57K30G Bosch



Hack01
12th January, 2019, 12:41 PM
Hi,
please help me clear this dump

Fiat Spider - Mazda MX5 2017y.
SRS Bosch 0 285 014 161
N243 57K30
eep 95128
Made in china
thanks

urametz
12th January, 2019, 11:48 PM
HELLO.Here you have the clean crash. Well, I definitely need your check and report. pass in pm/good luck.

Hack01
15th January, 2019, 09:47 AM
Thanks, I'll try. Pedestrian protection has also been activated.

urametz
15th January, 2019, 08:08 PM
Thanks, I'll try. Pedestrian protection has also been activated.


Pedestrian protection is activated and after you remove the unit and start the car. But when it is correct to remove : error - the unreliable signal from the unit srs ;becomes - protection calibration is required. After that, it is necessary to calibrate and the protection indicator turns off. The fault indicator srs turns off immediately and there are no errors in the block even without a pedestrian protection calibration.

Hack01
20th March, 2019, 05:39 PM
Hi Urametz,
clear dump workink.
Thanks

edda leung
12th August, 2019, 11:19 AM
Hello PW please

edda leung
12th August, 2019, 11:20 AM
hello PW please
HELLO.Here you have the clean crash. Well, I definitely need your check and report. pass in pm/good luck.

Krystianek28
11th July, 2020, 05:40 PM
Hello PW please

sidrop
5th February, 2022, 06:38 PM
HELLO.Here you have the clean crash. Well, I definitely need your check and report. pass in pm/good luck.
Hello, can you give me a pass, please?