PDA

View Full Version : SID807 problem reading



jolor
13th January, 2019, 01:55 AM
I to all. I have one ecu Sid807 with TC1797 from Ford Focus 1.6 Tdci 2011 and i try read with Ktag 7020 red pcb with Ksuite 2.23 and start ok but stop in 79% reading. Someone now what am I doing wrong to always give error to the 79%.

bersch8688
13th January, 2019, 06:49 AM
Which voltage adapter you use for ECU?

Best is voltage regulator is that
586655

jolor
13th January, 2019, 01:51 PM
I use a regulator like that, and nothing. Stop in 79%

crank54
13th January, 2019, 02:18 PM
Set the voltage 15v check the wires and connections with multimeter

LG-H860 cihazımdan Tapatalk kullanılarak gönderildi

jolor
13th January, 2019, 08:40 PM
I was told that there was a way to turn this Ktag into a KTM100 so I could read this Sid807. Can anyone help with this?

jolor
14th January, 2019, 12:23 PM
Problem solved with Ktag 2.25. Software problem.

hellmet
18th April, 2019, 09:20 PM
Did you install k suite 2.25 and so you solved the problem?
2.23 no good?