honda jazz/fit 2008 JDM 93c76

[mugen889]

Hi all

I have just imported a honda Fit (JAZZ) the clocks are in KM I have purchased a UK clocks from a 2011 model. Mine is automatic the uk spec is i Shift hence a later clocks.

I have dumped the bin file successfully heres the part im stuck on is correcting the millage Tachosoft 2.3.1 doesn't have my year(Honda fit 2008) the 2007 model states:

Car type: Honda Fit - 93c76 - 2007 years
The mileage is stored in the next lines:
01A0: 62 00 9D FF 62 00 9D FF 62 00 9D FF 62 00 9D FF
01B0: 62 00 9D FF 62 00 9D FF 62 00 9D FF 62 00 9D FF
01C0: 62 00 9D FF 62 00 9D FF 62 00 9D FF 62 00 9D FF
01D0: 62 00 9D FF 62 00 9D FF 62 00 9D FF 62 00 9D FF
where the next bytes:
62 00 9D FF - is a mileage

which looks similar to my 2008 dump i have amended all the addresses with the corrected millage from the calculator but when the dash is fired up its all blank

I'm new to this and its the first time doing this please can someone advise me where im going wrong. I don't usually like asking for help so thank you in advance.

I would like my millage corrected to 42000 Miles current millage is 3597 miles


587902

[Mike1001]

Hi all

I have just imported a honda Fit (JAZZ) the clocks are in KM I have purchased a UK clocks from a 2011 model. Mine is automatic the uk spec is i Shift hence a later clocks.

I have dumped the bin file successfully heres the part im stuck on is correcting the millage Tachosoft 2.3.1 doesn't have my year(Honda fit 2008) the 2007 model states:

Car type: Honda Fit - 93c76 - 2007 years
The mileage is stored in the next lines:
01A0: 62 00 9D FF 62 00 9D FF 62 00 9D FF 62 00 9D FF
01B0: 62 00 9D FF 62 00 9D FF 62 00 9D FF 62 00 9D FF
01C0: 62 00 9D FF 62 00 9D FF 62 00 9D FF 62 00 9D FF
01D0: 62 00 9D FF 62 00 9D FF 62 00 9D FF 62 00 9D FF
where the next bytes:
62 00 9D FF - is a mileage

which looks similar to my 2008 dump i have amended all the addresses with the corrected millage from the calculator but when the dash is fired up its all blank

I'm new to this and its the first time doing this please can someone advise me where im going wrong. I don't usually like asking for help so thank you in advance.

I would like my millage corrected to 42000 Miles current millage is 3597 miles


587902

Did you try the dash before trying to correct the mileage? Ie does the new dash work in the car but shows the wrong mileage?

[mugen889]

thank you for your reply the dash did work when connected it was displaying 3596 miles.

[Mike1001]

thank you for your reply the dash did work when connected it was displaying 3596 miles.

I’ll have a look tomorrow when I’m back at work. Tachosoft is prob wrong - a lot of the info on there isn’t correct unfortunately.

[teerak2uk]

try this and report

[Cllau]

mileage on your dump is 2226ML not 3597 miles... 588070

try this 42014ML.....:wink:

[clusters]

Mileage in his dump is 3597, and that is what he says it displays.

Your script is faulty. Not all dashes need to be converted to Km to calculate them.

I'll bet your file displays over 68,000 teerak2uk file is correct.

This also shows the importance of including the original reading when asking for help.

[Cllau]

he asked 42xxx in ML not in KM so I gave him what he asked for.. you are right about 67xxx in km.. > ML 42....... :captain:

[mugen889]

THANK YOU SO MUCH I LOVE YOU GUYS
what was i doing wrong so i dont have to trouble you in future

I will get this programmed tomorrow and update you guys

see pic for millage these are uk cluster

588100

[mugen889]

THANK YOU SO MUCH I LOVE YOU GUYS
what was i doing wrong so i dont have to trouble you in future

I will get this programmed tomorrow and update you guys

see pic for millage these are uk cluster

588100

[Cllau]

don't use my dump m8 there is 42... in ML that will show in dash 67...Km

[mugen889]

no problem thank you for taking the time to look at this for me :)

[mugen889]

im just curious to know how do we know where and how to change the file to correspond to millage am I missing something ?

[mugen889]

it Appears Terrak2uk's Dump did not work the millage and trip A and Trip B were all blank.
I thought I had duff clocks so I put the original dump back on and it worked so clocks were not faulty but the dump.

Cllau dump worked but its not the millage I require and also the service indicator states -999999 too is it possible to get that removed?

can someone help me amend a dump with the correct millage

thank you again

[Diagcar1]

Try this one,

[Cllau]

it Appears Terrak2uk's Dump did not work the millage and trip A and Trip B were all blank.
I thought I had duff clocks so I put the original dump back on and it worked so clocks were not faulty but the dump.

Cllau dump worked but its not the millage I require and also the service indicator states -999999 too is it possible to get that removed?

can someone help me amend a dump with the correct millage

thank you again

try this 42112Km not ML 100% :wink:

[mugen889]

thank you for taking your time to do this for me its much appreciated

[mainsmains]

can someone send me the pin connections for the 93c76 at the back off the board

[chris781]

[QUOTE = mainsmains; 3515351] can someone send me the pin connections for the 93c76 at the back off the board [/ QUOTE]

[mainsmains]

thanks very much

[chris781]

thanks very much

you have to press button thanks