Creation and duplication SDcard for Kess/Ktag/Trasdata

[Digital Under]

No need read CID, no need use linux, no need use any program

-Erase new microSD
-Put microSD into Kess or Ktag, connect to computer and start Ksuite
-Create image in hex-editor and post here

[Mario6]

Digital Under (https://www.digital-kaos.co.uk/forums/member.php/531047-Digital-Under)

Hi. I have a damaged SD card in Kess v2 5017 with a green PCB. I also have a second Kess with a red PCB. Kess with green PCB works with SD card from red. What should I provide you to fix this with green PCB. I have a new SD card. Do you need an SD card image opened by Hexeditor?

[Digital Under]

clear new sd card,
inser in kess,
connect to pc and run ksuite,
create image from microsd in hex-editor and post here

[Mario6]

Digital Under (https://www.digital-kaos.co.uk/forums/member.php/531047-Digital-Under)

Hi. I did as you advised me:
- I formatted a new card,
- I put the SD to Kess,
- I started the software kess 2.23,
- I created a picture of the card (my second kess) in the hex editor.
After a moment Kess came to life.
However, the protocols do not work. I can not put the SD card image because it is too big.

EDIT

Already repaired.
Thanks.Digital Under (https://www.digital-kaos.co.uk/forums/member.php/531047-Digital-Under)

[Digital Under]

Digital Under (https://www.digital-kaos.co.uk/forums/member.php/531047-Digital-Under)

Hi. I did as you advised me:
- I formatted a new card,
- I put the SD to Kess,
- I started the software kess 2.23,
- I created a picture of the card (my second kess) in the hex editor.
After a moment Kess came to life.
However, the protocols do not work. I can not put the SD card image because it is too big.

EDIT

Already repaired.
Thanks.

read first post:

[morgano]

read first post:
-Erase new microSD
-Put microSD into Kess or Ktag, connect to computer and start Ksuite
-Create image in hex-editor and post here

Don't worry anymore mate, he send me his SD CID and now his unit is working again ;)

[Digital Under]

I am very glad that you help too.

[koranx]

I need to share a 4 GB image here?
I need to share a 4 GB image here?

[Digital Under]

I need to share a 4 GB image here?
I need to share a 4 GB image here?

make archive and upload on mega

[koranx]

https://mega.nz/#!e25BFIZY!_wjkvPcaNOQDv0tG14OeTb4cAWDPZSKf4DuBneG 5EU0

[morgano]

https://mega.nz/#!e25BFIZY!_wjkvPcaNOQDv0tG14OeTb4cAWDPZSKf4DuBneG 5EU0

lol

You know what winrar is??? a sd image once RARed cannot be 3.78Gb long

[koranx]

I know, I forgot. Put in another .rar again?

[koranx]

https://mega.nz/#!7uxnyShA!dOLa0wutkq-E-ygmP7H4Uw7Yf2HgrDiqrdON4bxxvqQ

[Digital Under]

kess or ktag?

[koranx]

Kess V2 Red

[morgano]

Kess V2 Red

And you can use the standard image for red kess as your sd cid is the common one (based on the image you uploaded).


https://yadi.sk/d/GCe8tbJu9OH36Q

[AudiA53xxx]

Hello, first I got Wake Up error and I searched some soluttions on the Internet. So far i found one, were they say I should copy some files on the TF (SD) Card of my Kess. Now my Kess says Protocol Not found. Pleas help me i Uploadet a Image of my TF Card on Mega.

Its a Red KessV2 5.017

https://mega.nz/#!wFNymIoK!i9tZBdXflvlihmkW6P3eq3qk3u5AR_Kd8gKPQzq Bk6E

Thanks for Help :)

[AudiA53xxx]

Hello I am new here.

I have KessV2 Red with fw 5.017. First it was "Wake up error" than I searched on the internet for solutions and it said I should format my SD Card and put copy some new files on it. Than it was "Protocol not found. I uploadet my New SD Card image to mega here is the Link https://mega.nz/#!wFNymIoK!i9tZBdXflvlihmkW6P3eq3qk3u5AR_Kd8gKPQzq Bk6E

Thanks for help.

[AudiA53xxx]

What is the Passwort for extracting it?

Thanks

[amrif]

This is binary image of my kess card. 2.35, 4.036. Do you can help?

https://www114.zippyshare.com/v/WAbRmOkd/file.html

[morgano]

This is binary image of my kess card. 2.35, 4.036. Do you can help?

https://www114.zippyshare.com/v/WAbRmOkd/file.html

4.036 sd card is not crypted, your dump is useless for any other thing than use in another 4.036

[tkmmazda]

Hi,
I need a better quality Ktag 7.020 card. Can you help me ?593048

[tkmmazda]

Hi,
I need a better quality Ktag 7.020 card. Can you help me ?SD_Ktag7.020_Sandisk.rar (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=593048&d=1549308346)

[nofear3]

Hello!
Kes 5.017 red.

Here is link to memory card image: https://mega.nz/#!Tq4xjIZQ!gHIae9SSDrEiA_H19vYY4nY6Ghx9nCQJqB8uwd9 Jn6E

Big thank`s to help

[morgano]

Hi,
I need a better quality Ktag 7.020 card. Can you help me ?SD_Ktag7.020_Sandisk.rar (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=593048&d=1549308346)

Sorry mate, not enough age/career on forum to qualify for a free image for your clone.


Hello!
Kes 5.017 red.

Here is link to memory card image: https://mega.nz/#!Tq4xjIZQ!gHIae9SSDrEiA_H19vYY4nY6Ghx9nCQJqB8uwd9 Jn6E

Big thank`s to help

The same applies to you.

[soulbreaker]

Hello
I'm new in the forum and I need help.
I have problems with wake up
where can I find updated sd files for my red kess v2 5.017?

[bergbahn]

Hello
I'm new in the forum and I need help.
I have problems with wake up
where can I find updated sd files for my red kess v2 5.017?

https://www.digital-kaos.co.uk/forums/showthread.php/713605-Kess-5-017-how-to-read-SD-card-or-create-a-new-SD-card?p=3463522&viewfull=1#post3463522

[Ninacivic]

hello, i want to read the vag temic family 615 with my kess v2 red 5.017.
what we need for this?
can you help me
https://mega.nz/#!LCgwzIiK!-9LzkU-6SbxIKgjAHWo_SZBaGPmC5uQzixdVUjZDL58

[Escap3]

https://mega.nz/#!7RJWwSqT!3uBEPlp2KKD1efBOhXb6qr2oUaA7A3_DqvC4AB8 a2Zo

[pocinas]

No need read CID, no need use linux, no need use any program

-Erase new microSD
-Put microSD into Kess or Ktag, connect to computer and start Ksuite
-Create image in hex-editor and post here



it is Ok if i share you just 13 Lines Readed Throught WinHEx from New Card after FILLIN Zeros and used in KESS/ktag. I got some instr. but i am stuck.

Attached file is from KTAG 7.020 with new sc card Filled 00, and generated via ktag/ksuite

[morgano]

it is Ok if i share you just 13 Lines Readed Throught WinHEx from New Card after FILLIN Zeros and used in KESS/ktag. I got some instr. but i am stuck.

Attached file is from KTAG 7.020 with new sc card Filled 00, and generated via ktag/ksuite

I would say your key file is bad.

[siriusx]

And you can use the standard image for red kess as your sd cid is the common one (based on the image you uploaded).


https://yadi.sk/d/GCe8tbJu9OH36Q

Do we just copy and paste the file under windows?



從我的iPhone使用Tapatalk 發送

[bergbahn]

I would say your key file is bad.

I say if your key file is from a new SD card, then nobody can say it´s bad or good.

[morgano]

I say if your key file is from a new SD card, then nobody can say it´s bad or good.

You are 100% wrong! I can say it.

That key file is not valid to make a working sd card.

[pocinas]

Thanks a lots gentelmens for Offer build me IMAGE. I found solution so i do it Self.

[morgano]

Thanks a lots gentelmens for Offer build me IMAGE. I found solution so i do it Self.

And the key file you uploaded here is not the valid one for your card, right?

[pocinas]

And the key file you uploaded here is not the valid one for your card, right?Don' t sure now but i can check again this 13 lines for you just to knows who have right..

I using little diffrent technics without CID with sd psychics which i wrote yesterday here

Post 111
https://www.digital-kaos.co.uk/forums/showthread.php?p=3542456

[morgano]

Check please if your actual working sd key matches the one you uploaded here.

[pocinas]

Check please if your actual working sd key matches the one you uploaded here.

MORGANO you have RIGHT, key from my NEW SD Card which i posted in post #30 is wrong. To test i generated image with this key and KSUITE doesnt work.

Correct key is like in photo bellow
and 2nd photo which i share in post 30 with wrong Offset

The Diffrence is i share KEY with starting OFFSET 00005010 but i should start 7 lines later from 00005070

[morgano]

Thanks for clarifying, was obvious to me the key was wrong ;)

[gas43]

No need read CID, no need use linux, no need use any program

-Erase new microSD
-Put microSD into Kess or Ktag, connect to computer and start Ksuite
-Create image in hex-editor and post here




Ι did a mistake and i erase the sd card of my kess... is there a solution?
can I put again the erase microsd into kess, create image and post here?
Thanks!

[morgano]

Yes you can.

[pocinas]

Is not correct..

Card before put to kess should before filled 00 via hex editor

[gas43]

Here my image of erased sdcard (format was fat, not fat32), after connect into kess v2 5.017 red pcb and start-open ksuite http://www.filedropper.com/sdcard

[gas43]

I would like to thank publicly the member "pocinas" who create a new sd card and saved my kess!!!!
It is very important that we have such excellent members in our forum!

The unbranded sd cards, make big problems, guys...

Thank you again!

[prusony]

Please make SD-card for K-TAG.
KSuite: 2.25
HW: 7.020

Tthanks in advance!

[Digital Under]

Please make SD-card for K-TAG.
KSuite: 2.25
HW: 7.020

Tthanks in advance!

https://www.digital-kaos.co.uk/forums/showthread.php/713605-Kess-5-017-how-to-read-SD-card-or-create-a-new-SD-card?p=3649794&viewfull=1#post3649794

[prusony]

Works !
Thank you very much!!!!!!

It's so easy to do... )))

[gas43]

Works !
Thank you very much!!!!!!

It's so easy to do... )))

I told you!!!! :chuncky:
https://www.digital-kaos.co.uk/forums/showthread.php/470321-Kess-V2-Harware-Rework-FREE-SOLUTION!/page106

[maxcoff]

Hi/ Pleas help with my empty TF image for KESS 5017
https://mega.nz/#!1xZyxS4A!9ESFvqhZt_oeczMb1UTt_pnQhTfrvVmEXIKMypZ XUN4

[brouk5]

please , Kees 2 red plate thanks !
https://mega.nz/#!iUcRBSYa!A0dkFVOtiODiAnm3JTSNfTgXgXRJQZx4_tqVZfb fJLs

[shamika]

mine k-tag 7.020

[powerelectricpl]

Please make SD-card for K-TAG.
HW: 7.020

Tthanks in advance!

https://mega.nz/file/WgZwTTLK#MntCfNs8-cP5_Dc5SB9Puu7GlFVqqaSse7joMRY55Oo

[Dzeepromer]

hi, i need help
img for ktag hw:7.020
CID SD CARD :
1b534d4242324d57308daf5329011901