rebello
28th January, 2019, 11:45 AM
Hi chaps! I have a audio car module which is bricket by a aborted update procedure. No chance to get PBL to run and to reflash again. So i need another way to reprogram it.
The module is driven by an 70F3352(A) which has only 768 kb of internal Flash. I found the JTAG pins exposed to pads on the board, but i guess the chip is protected against read or erase/write to flash. I have another working module where i potentially could read the content, but beed advice how to do it.
The module is driven by an 70F3352(A) which has only 768 kb of internal Flash. I found the JTAG pins exposed to pads on the board, but i guess the chip is protected against read or erase/write to flash. I have another working module where i potentially could read the content, but beed advice how to do it.