Mercedes W216 ME9.7 ECU Renew

[temel007]

Hello Guys,

i have a problem with cloning my ECU. I Just used Galletto to do a Backup of my old ECU (FLASH,MIC,EEPROM). I Write everything to the donor ECU. But the Car does not Crank. I tried to teach in Drive Authorization, but DAS can't read out the actual Values, so it does not do the teach in. Then i write the donor files back to ECU and DAS can read out the Drive Authorization Values (but it will not teach in becouse the ECU is not virginized). I used then MB ECU Cleaner v1.7 to virgin ECU and Flash und write it back to donor ECU (I also tried only EEProm virgnizing, but same problem). I do Factory Data Coding and then Teach in Drive authorization, but it cant read out the actual Values again. Pls i need Help. Is there anybody who can virgin my Files by the right way (maybe with FVDI/VVDI). I Have Galletto, XProg, KWP2000 and Carprog as Hardware. I read the ECU over BDM connetion with Galletto.

The Datas:
ECU: A273 ME9.7 with 95080 EEProm
Car: W216 CL500 V8

Thanks, and Best regards,
temel007

[figani]

Hello Guys,

i have a problem with cloning my ECU. I Just used Galletto to do a Backup of my old ECU (FLASH,MIC,EEPROM). I Write everything to the donor ECU. But the Car does not Crank. I tried to teach in Drive Authorization, but DAS can't read out the actual Values, so it does not do the teach in. Then i write the donor files back to ECU and DAS can read out the Drive Authorization Values (but it will not teach in becouse the ECU is not virginized). I used then MB ECU Cleaner v1.7 to virgin ECU and Flash und write it back to donor ECU (I also tried only EEProm virgnizing, but same problem). I do Factory Data Coding and then Teach in Drive authorization, but it cant read out the actual Values again. Pls i need Help. Is there anybody who can virgin my Files by the right way (maybe with FVDI/VVDI). I Have Galletto, XProg, KWP2000 and Carprog as Hardware. I read the ECU over BDM connetion with Galletto.

The Datas:
ECU: A273 ME9.7 with 95080 EEProm
Car: W216 CL500 V8

Thanks, and Best regards,
temel007

the eeprom you upload is from a W221 sedan... (?)















When I help you press Thanks and Reputation...

[temel007]

The Dump is from my donor ECU. The Donot ECU is from an W221 with the Same engine. Mercedes Benz gave me the Number of ECU. This ECU is used by W216 and W221. Could anybody pls Support me to get the Engine started. Thanks

[droidwayne65]

The Dump is from my donor ECU. The Donot ECU is from an W221 with the Same engine. Mercedes Benz gave me the Number of ECU. This ECU is used by W216 and W221. Could anybody pls Support me to get the Engine started. Thanks
Welcome to the club :D. I have a demon W203 with a similar problem. Here is the unlocked eeprom for your donor ecu. If all goes well, you ought to be able to adapt the DAS. :)

[temel007]

Thank you very much! I will test it tomorrow and give you feedback.

[temel007]

@droidwayne65, thank you so much. The car is running now. I was able to teach in drive authorization after uploading your file. Best regards temel007.

[droidwayne65]

@droidwayne65, thank you so much. The car is running now. I was able to teach in drive authorization after uploading your file. Best regards temel007.
You're welcome. If only my W203 would have also succumbed to the charms of an unlocked eeprom! :D

[BLOODMOTORSPORT]

you got ya car up and running how did u laod the bin file

[ibratex]

please give me ahand with this also ,, i am trying to install this ecu on cl500 but its from gl
but its me9.7 is that possible ? in car i cant detach authorization drive , this is my file

can you also change vin in ecu ? if yes my vin is wdd2163711a009226