2016 Toyota Corolla H key immobilizer synchronization

[skilion290]

Hi folks I had to change immobilizer for this 2016 Toyota Corolla key type is H because original immo got soaked with water.i have done the Toyota 30 minutes synchronization many times but keep getting error code that says unmatched key code .please can any one help me with the type of ic or chip type to swap to get the car started pls [emoji1488]I see a tpms chip but don’t know if that holds the data.591797591798


Sent from my iPhone using Tapatalk

[artcom]

Solder the processor to another working immo and everything will work.

[skilion290]

Thanks a lot artcom


Sent from my iPhone using Tapatalk

[m-o-y]

there is a function , program immo.
after replacing

[MBGL]

I wonder where is immobilizer control module located? (may be you have photos?)

[artcom]

immo is behind the climate control unit

[KriptoKey]

If you are replacing the immo with the same part number and you have a key running on the immo donor, it is only necessary to make the bridge for 30 min and that's it. The vehicle is American or European version?
regards

[artcom]

Yes bridge for 30 min

[artcom]

there is a function , program immo.
after replacing

in this case, it was not necessary to program immo because it sealed the processor from the old immo to the new immo.

[artcom]

If you are replacing the immo with the same part number and you have a key running on the immo donor, it is only necessary to make the bridge for 30 min and that's it. The vehicle is American or European version?
regards

I think it is Amerikan version