Immo dash on ibiza 6L

[blaze68]

hi im new here, i need some help, because i have a seat ibiza 6l with trw dash , ( this dash is soon died ) , im buying a vdo dash to swap it, but with vag k+can commander 1.4 i can't read dump on TRW dash, on VDO its ok (pin code ok ) , i desolder the chip 24c04 on TRW , read bin file with ch341a. and i dont know how find the pin code. if someone can tell me pin code .many thanks592009

[rafal]

24c04 trw ?
should be 24c08

[blaze68]

592027592028
24c04 trw ?
should be 24c08
sorry you right its 24LC08B
here a new screen

[rafal]

post dump here..............

[rafal]

01529............

[blaze68]

01529............ yes i find the same pin code with vag k+can but in ECU menu, and when i use vcds to synchronise the new cluster in menu 50 (need PIN of TRW cluster), dont work. i dont know why

[rafal]

are u sure about swap dash from trw to vdo and will work ?

by me will work if immo off will be done in ecu..........

[blaze68]

are u sure about swap dash from trw to vdo and will work ?

by me will work if immo off will be done in ecu..........


yes i have done research on google and a lot of owner of Ibiza who have a TRW, have changed dash by a VDO.Car the TRW are known to be disaffirmants, and even Seat replaces it with a vdo. I think the immo off is the solution, but I'm not equipped to extract

[rafal]

what ecu have u got ?
post info about ecu

[blaze68]

its edc15 , my car tdi 130 2004

[rafal]

read eeprom from ecu................

[blaze68]

read eeprom from ecu................
ok tomorrow i read eeprom from ecu, and i post here

[dominik.m]

You wrote that you have vag k + can commander. You can easily read the pin and make an immo off in this ecu.

[blaze68]

You wrote that you have vag k + can commander. You can easily read the pin and make an immo off in this ecu.

when i clik on immo off, nothing happen.

good news, i can start the car , just immo light flash all the time, when i check with vcds , it says "error 01179 incorrect key programming", when i try to learn the key, it's ok for 1 key, and if i recheck, its rest on 0.

I modified the VIN in the vdo to be the same as original , but it's the same.

[kiszka]

when i clik on immo off, nothing happen.

good news, i can start the car , just immo light flash all the time, when i check with vcds , it says "error 01179 incorrect key programming", when i try to learn the key, it's ok for 1 key, and if i recheck, its rest on 0.

I modified the VIN in the vdo to be the same as original , but it's the same.
pin ecu is 1529 ok
immo off ok

[blaze68]

pin ecu is 1529 ok
immo off ok
thanks everybody for your time to help me. I will stay like that with the immo off.