PDA

View Full Version : Polo 6R MM 7GV Ecu need pin mac cs immo id



saintgp
3rd February, 2019, 07:06 PM
hi people

i need your help with the pin, cs, mac, immo id from a polo 6r with a magnet marreli ecu 03C906014ED BENZIN 7GV CLPA.
the eeprom is a 95320 8pin

i need to code a second hand cluster to this ecu.

Thanks in advance

rafal
3rd February, 2019, 07:34 PM
pin: 20885

dimon9555
3rd February, 2019, 08:23 PM
pin: 20885

pin is wrong

rafal
3rd February, 2019, 08:40 PM
pin is wrong

show good one...................

saintgp
4th February, 2019, 06:57 AM
i need the

pin:
CS:
Mac:
Immo id:

rafal
4th February, 2019, 08:20 AM
i need the

pin:
CS:
Mac:
Immo id:

read comfort module and post here dump

exe123
4th February, 2019, 09:17 AM
Why should he read comfort module on Polo?

Here is your data:
VIN: AAVZZZ6RZDU032355
CS: ABB0A2B2FBB5
MAC: 01FF64DE
PIN: 10476
Coding: 00000300

saintgp
4th February, 2019, 02:24 PM
thanks for the feed back exe123 but unfortunately the info is not correct or i don't know how to use it.

1> when i try login into the ecu with pin 10476 it gives me invalid login

2> when i try to write the CS into the cluster it gives me invalid length (on the cluster the CS is 24 digits)

Thanks to Rafal for the pin 20885

1> when i try to login to the ecu with the pin 20885, it gives me wait time activated


This vehicle has a BCM PQ25 6R0937087K module.

1> how do i read the flash and eeprom from it. (what tool and connection diagram)

exe123
4th February, 2019, 02:42 PM
ECU stores 6bytes only!
If you want to get full CS 12Bytes you need to obtain it from original dashboard.
Without original dashboard it is impossible to get 12byte CS and you need to make new transponders (you cannot unlock original keys in this case!) and use the 6 bytes from ECU + 6 remaining for used dash.

saintgp
4th February, 2019, 03:17 PM
when i tried to put the orignal dash into service mode by eeprom(24LC32), the dash died. i tried to write the orignal file back still dead.

this is the reason why i need to replace the dash. i will attach the orignal dash file maybe you can repair it.

I have 2 files 1x vvdi2 is via obd and 1x vvdiprog is via the eeprom

saintgp
5th February, 2019, 07:12 AM
is it possible to edit the information in the ecu eeprom (95320) to match the cluster.

Vin: AAVZZZ6RZAU029363
IMMO ID:
CS: 50538082A0A751EEFFF6A3DD
PIN: 34104
MAC: C6E7229F

saintgp
5th February, 2019, 06:36 PM
help please this is now becoming urgent

ypiter
5th February, 2019, 09:20 PM
Try dump...

saintgp
5th February, 2019, 10:16 PM
thanks ypiter

i tried this file but vehicle start and cut

ecu blocked by imobilizer fault

avital
5th February, 2019, 11:50 PM
I unlock these type ecu by immo emulator WFS4

https://uploads.tapatalk-cdn.com/20190205/605d79b7ebcef1cad21d3a65aa410012.jpg


Wysłane z iPhone za pomocą Tapatalk

saintgp
6th February, 2019, 11:12 AM
help Please

pouleddy
7th February, 2019, 07:45 AM
is it possible to edit the information in the ecu eeprom (95320) to match the cluster.

Vin: AAVZZZ6RZAU029363
IMMO ID:
CS: 50538082A0A751EEFFF6A3DD
PIN: 34104
MAC: C6E7229F
Hi, try this dump and i see you have vvdi, try write immo info manual in ecu and re-adapt & see if power class in dash is same as ecu?.

shotman
28th January, 2020, 01:53 AM
pincode 10476