PDA

View Full Version : Jaguar S-Type 3.0 V6 Lambda off



Thinkpad88
3rd February, 2019, 09:32 PM
Hi,

I have Jaguar S-Type 3.0 V6 Petrol with Denso MB079700-9340 ECU. Car has removed catalytic converters and now need to remove DTC's for cat efficiency, P0420 & P0430. I found 2 maps, 8x10 at 0x69900 and 0x69974, I think those are lambda maps.

Best regards

mprog
3rd February, 2019, 11:13 PM
Please write results, i make first time this ecu

Pass in PM

BR

Thinkpad88
4th February, 2019, 09:54 AM
Thanks very much, will try and report. I hope it works as its quite time consuming to remove this ECU.

Thinkpad88
4th February, 2019, 08:15 PM
Didnt test file yet, tried with KTAG (clone), I get error "Ecu not identified 0x100B". I read than with Galletto, file same as with KTAG but also cannot write. CMD doesnt support this ECU, what else remains is Piasini.

Any ideas?

mprog
4th February, 2019, 09:13 PM
IO Terminal :)

Thinkpad88
5th February, 2019, 08:01 AM
Does IO terminal support cheksum? Is file with cheksum or not?

Thinkpad88
7th February, 2019, 10:00 AM
Bump

Best regards

Thinkpad88
8th February, 2019, 10:23 PM
IO Terminal :)

I tested your file and its not OK, had to delete DTC's, they didn't disappear after reflash, also they were pending: I deleted them but after driving 2 days they will come back on.

mprog
8th February, 2019, 10:31 PM
Please test second file

Pass in PM

Best Regards

Thinkpad88
9th February, 2019, 10:39 AM
Please test second file

Pass in PM

Best Regards

Hi, I tried file but not OK. No DTC's but engine light is flashing ...

voltechcar
9th February, 2019, 11:23 AM
I know how edit this file.

Thinkpad88
10th February, 2019, 09:53 PM
I know how edit this file.

Really? Would you try? :)

voltechcar
10th February, 2019, 10:43 PM
Really? Would you try? :)

should be work

Thinkpad88
14th February, 2019, 10:42 AM
should be work

File works, but not 100%. After few days P1000 came on, its the dtcs that always came with P0420 and P0430, now since cat efficiency dtc are off, now it only P1000 comes on, meaning that system check is not complete.

Can you remove also P1000?

Best regards

jonasgsxr
31st October, 2019, 11:04 AM
should be work


hi mate do can you give me the pass for this file im having a situation tha its almoste the same and i would like to turn off the lambda so i can get to a diagnosis thanks

vadzik
29th February, 2020, 08:50 PM
should be work
Hello dear. could you share the file i have the same problem

dmitrsev
9th February, 2024, 09:00 AM
should be work

Good job! Thank's