Fiat Scudo Bosch EDC15C2 0281011247 EEprom wanted

[alexbeshko]

Hi all.
Car dont start, owner try cranking till batttery go to 0. Was just disel pump broken.
Now i cant connect to the ECU, car dont start, fuel pump run, glow plugs not switch on.
I check all wirings, supplys, diagnostic lines - all ok.
Can sombody check eeprom if it is ok or maby have dump from same part number.
Eeprom is in attachment.
Thanks in adwance.

[alexbeshko]

Year of manufacturing - 2005, RHW Engine, 16 valves.

[kiszka]

Year of manufacturing - 2005, RHW Engine, 16 valves.

eeprom looks like it's fine

[alexbeshko]

Thank You.

[alexbeshko]

Can You calculate PIN from this ECU. I will try swap BSI an ECU. I also reed eeprom in texton module 96398198.80. I attach also.

[kiszka]

Can You calculate PIN from this ECU. I will try swap BSI an ECU. I also reed eeprom in texton module 96398198.80. I attach also.

bsi
93c66/95040, 8pin, 512 Bytes
Peugeot: 306, 806, Expert, Ranch
Citroen: Jumpy, Evasion, Xantia(-1999), Xsara(-1999)
Fiat: Scudo, Ulysse
ID: 33
Transponder Type: T5 or PCF7930/31

[alexbeshko]

Please check attached dump from texton module. I think it is corrupted. How to make it virgin? This is a photo from bsi which I have https://uploads.tapatalk-cdn.com/20190206/a21622617e5f2b4fbab9e262aab720c3.jpg

Надіслано від мого SM-J500H, використовуючи Tapatalk

[kiszka]

Please check attached dump from texton module. I think it is corrupted. How to make it virgin? This is a photo from bsi which I have
Надіслано від мого SM-J500H, використовуючи Tapatalk
yes is bad

[alexbeshko]

Can you calculate pin from ecu?

[coba]

Hi m8.

Where do you located this module?

I am trying to find it but i dont see it :S:S:S:S:S

I give thanks