PDA

View Full Version : mazda 6 2.0 RF7K denso 2008 DPF off



ziko
5th February, 2019, 04:49 PM
Hi,

Please need dpf off for this denso ecu


Thanks

TilQ34
5th February, 2019, 05:17 PM
Here, try this....

ziko
5th February, 2019, 05:31 PM
Please if someone has tested, because costumer not live here and will go far from here, so must be good 100%

unnamed11112007
5th February, 2019, 06:14 PM
Please if someone has tested, because costumer not live here and will go far from here, so must be good 100%
"ASC DPF Remover" good work with this ECU (plug connected (need reset oil after mod file flash))

kowal5
5th February, 2019, 06:55 PM
100% ok. Pass PM.

ecuworks
5th February, 2019, 07:06 PM
Hi,

Please need dpf off for this denso ecu


Thanks


pleas pm for password end thanks my

Hexer84
5th February, 2019, 09:39 PM
Here you have 100% working solution.

Password via private Message

Did it many times on Mazda 6

ziko
6th February, 2019, 02:11 PM
Thanks to all who helped, I put "ecuworks" file and after flashin ecu DPF was blinking (in ecu no more DTC) so I did DPF regerenation with Delphi and after that DPF goes off and car has power again

Thanks again

ziko
12th February, 2019, 05:39 PM
Today dpf light comes again,and car not have power again
What next?

jenny123
12th February, 2019, 06:23 PM
Today dpf light comes again,and car not have power again
What next?

1. Flash with my file
2. Disconnect sensors (under plastic cover)
3. Perform a oil reset - u need a wire and second person to help:


Ready to go :)

Pass on PM

ziko
12th February, 2019, 08:00 PM
Hm, sensors not disconnected,maybe thats problem in my case,but I readed other posts says sensors should be connected.
Will try as you say
Tnx

ziko
26th February, 2019, 05:10 PM
I put jenny123 and did all as you say,after 100m drive dpf flashing again,then I put kowal5 file (before with Delphi reset dpf,flash and reset oil) and till now is ok,will see next days. All sensors remain disconnected

Hakera26
25th March, 2019, 06:05 AM
Hello. After stopping the dpf with the swiftec the car has no power. Reset dpf and oil before and after flash. No effect. Can the problem be that the differential sensors are included? Both egt sensors show 700 ° C

TO6KO
5th August, 2021, 10:56 AM
PASS PLEASE ?

TO6KO
5th August, 2021, 10:58 AM
100% ok. Pass PM. PASS PLEASE ?