Opel Zafira 2000 PINCODE

[Belloriccoefamoso]

Hallo nice people
customer have Opel Zafira of 2000 but pin code result wrong
if i read bin can someone help me extract the right one?
he have one key but can't program others
(the card show a wrong code, maybe second hand car with substituted immobox)

[bank]

Post dump from immo

[immokill]

sure read and post

[Belloriccoefamoso]

i had read it with a tms reader so the file is with extension tms and i renamed it to .bin too

[Belloriccoefamoso]

please someone can help me? outside customer shouting.....i little bit desperate

[immokill]

bad reading bro

[immokill]

it has to look like this ​https://www.digital-kaos.co.uk/forums/showthread.php/685666-opel-zafira-tms370-nead-pin?p=3365588&viewfull=1#post3365588

[Belloriccoefamoso]

my friend electronic read it with tms reader, i had renamed to .bin and read with tmpro, it say just module not active, not file corrupted....
now the car no restart after resold eeprom so i'm desperate and the only one oportunity is read the ~~~~ing pincode

[Belloriccoefamoso]

my friend electronic read it with tms reader, i had renamed to .bin and read with tmpro, it say just module not active, not file corrupted....
now the car no restart after resold eeprom so i'm desperate and the only one oportunity is read the ~~~~ing pincode

[Belloriccoefamoso]

have virgin file?

[immokill]

put file from link and reset wit pin code that show on threat and it is virgine but you dont know your car pin code

[brend]

Mate!
First try read this correct like its must by!!!
Sended from you dump its totaly coctail.........in here no vin, no pin ,no nothing!!

No virgin sulution for this .
Its possible reset ang programm agane obd2 away but for this need pin code from this.



What you try write if you dont know how read this correct?




have virgin file?

[Belloriccoefamoso]

ok
sorry if i seem rude, maybe i'm just desperate.
i try explain well the situation:

1) customer arrived this money with car and one key working but he have the keycode card but when try connect it say wrong pin

2) with a pen there was written a second pincode "correct pincode" BUT it don't work too and i suspect the immobox is secondhand from other car, customer don't know, he buy car one week ago

3) i decided read eeprom and try extract pin with tmpro

4) unfortunately i don't have tsm3700C02 eeprom support so i run to my friend, an electronic of cars, expert, and he read it for me with a dedicated tsm reader, and the file is the tsm file i posted

5) i renamed it from .tsm to .bin but i don't know how read or convert the tsm file..... i just renamed it

6) i resolded the eeprom and NOW the working key no work

7) car is parked in front my office and customer went home by train, so you can image my desperation

8) so i ask step by step if someone can help me and how

9) i have upa usb, tmpro, advanced diagnostic

thank you all a lot

[kiszka]

i had read it with a tms reader so the file is with extension tms and i renamed it to .bin too

pin is 5801
the mechanical key is s1888 if it is compatible with the card
if not immobox has been replaced
vin Y2304691

[Belloriccoefamoso]

wow compliments 5801 is the FIRST written in the carpass BUT no work when i try program new key, say error
second code written by pen from someone was 6545 but this second too no work
now the problem is biggger, no work either the first working key, this is why i'm desperate

and how did you read it while nobody else arrived?

anyway now...no one key start engine and noone code open program function

[immokill]

hehehe i saw too 5801 3 times in ascii region he can try if he didnt get stuck in time security trap

[super jumbe]

Try to reset ECU if this will accept pin.

[kiszka]

wow compliments 5801 is the FIRST written in the carpass BUT no work when i try program new key, say error
second code written by pen from someone was 6545 but this second too no work
now the problem is biggger, no work either the first working key, this is why i'm desperate

and how did you read it while nobody else arrived?

anyway now...no one key start engine and noone code open program function
give me the immobox

[Belloriccoefamoso]

look images
i think ihad solded well
i had retry advanced diagnostics...no comunication, failed any temptation to connect

[kiszka]

look images
i think ihad solded well
i had retry advanced diagnostics...no comunication, failed any temptation to connect


5801 is ok there is no other and will not be there

[Belloriccoefamoso]

NOW noone key work after sold-desold
NOW advanced diagnostics SAY "failure connection"
BEFORE 1 key working
BEFORE advanced diagnostics enter in program procedure but say error to both pin codes: 5801 and the one written by pen 6545

[szengen]

you kicked it as you can, you have a code card from this car = original code, upload to tms content with a known code, can be from kaos, then you have old and new code, use the op com interface for synchronization

[kiszka]

NOW noone key work after sold-desold
NOW advanced diagnostics SAY "failure connection"
BEFORE 1 key working
BEFORE advanced diagnostics enter in program procedure but say error to both pin codes: 5801 and the one written by pen 6545

probably you have enabled the login timeout

[szengen]

with a good, connected can of immobilizer, without this delay the time will not drop, waiting time 10 minutes

[Belloriccoefamoso]

friends

now noone key start engine.....

[kiszka]

friends

now noone key start engine.....


if you log in, you will program the key

[Belloriccoefamoso]

new update, after resold and reinstall, now advanced diagnostic connect!
ask pin and i put 5801 it say ok and start procedure of program with classic swich off swich on..... but after a while it say procedure failure
what can i try?

[Belloriccoefamoso]

friend i resold all antenna and tms...
clearing and resolding



You soldered the antenna immobox

if you log in, you will program the key

check also tms soldering

[Belloriccoefamoso]

are you all sure there is a 10 minute timeout?

[kiszka]

new update, after resold and reinstall, now advanced diagnostic connect!
ask pin and i put 5801 it say ok and start procedure of program with classic swich off swich on..... but after a while it say procedure failure
what can i try?
I do not remember by heart but turn on and off several times

[Belloriccoefamoso]

are you all sure there is a 10 minute timeout?

[kiszka]

NOW noone key work after sold-desold
NOW advanced diagnostics SAY "failure connection"
BEFORE 1 key working
BEFORE advanced diagnostics enter in program procedure but say error to both pin codes: 5801 and the one written by pen 6545
if the lock is active,

[Belloriccoefamoso]

WOW, A NEW FANTASTIC UPDATE,
i had wait 15 minutes
incredible!!! now with advanced diagnostics i had program 2 new keys (there is evenn the old one programmed) ....and it say: 3 total key programmed!!!



BUT BUT BUT BUT BUT BUT BUT BUT BUT BUT BUT BUT BUT BUT BUT BUT ....
when i try start engine, after 2 seconds engine switch off like key is not programmed, and this with all 3 keys

[Belloriccoefamoso]

what can i try?

[szengen]

When the old car is in pain, start repairing lexuses

[kiszka]

what can i try?
you fall into a trap because you are tired,
Get some sleep
tomorrow it will be easy to do

[Belloriccoefamoso]

i can't sleep if i don't solve it......
customer had to go home by train, far 50 km...and i'm not so tired.....
now i had disconnect battery
i try delete all keys and program them again...

[Belloriccoefamoso]

i try...but...delete. program but...no start engine...

:grumpy:

[kiszka]

i try...but...delete. program but...no start engine...

:grumpy:
you have reset, maybe the ECU

[bank]

and how did you read it while nobody else arrived?

hex to bin :)

[motronix85]

Check Engine Ecu has the same Pin as the immo.
Erase All keys, Program first only one key, make sure engine starts.
When it starts add other keys.

I have had this problem before, it had come down to the engine Ecu being faulty, communication on serial line with immo is interrupted when ignition is turned on, in this case, check wiring and ecu connector for damage, if no damage then replace engine ecu.

[Belloriccoefamoso]

hallo
i'm locksmith not mechanic....
anyway last funny update:
i had transport car to official opel center
they found engine error led hidden with black scotch to not show there are problems
car was sell 1 week ago
owner called serrler and seller told this: if you don't like the car i can change it
so he knew there are main errors.....
i had wrong in touch a car with unknown problems...now i know...
NEVER TOUCH THE SHIT
i had lost time and money but learn many many things
thank everybody for support