Mazda CX-9 All Keys Lost Car wont crank

[Friends4eva]

Hi all,

I've tried to do an AKL on 2007 Mazda CX-9,

The car just wouldn't crank, I think its transponder related, I tried Tango generated ID63, VVDI Key tool generated ID63 etc,

Some guys tells me I must use orginal ID63 chip rather than generated ones, Is it true?

And what about ID63+?


Thanks for your help

[p1et]

Yes, just use original 4D63, might be used one from another key.

[sleepyrz]

you programmed two keys??

also which ignition is this ?

regular key or prox?

adpro manual p.491

THESE ARE VARIENTS OF FORD SYSTEMS.
Make sure the vehicles voltage is kept at at least 12
volts during programming. Using jumper cables or a
booster pack is highly recommended.
At least 2 KEYS must be programmed into the system
in order for the engine to start.
Erasing all keys and cycling only 1 key will result in a
NO START situation.
The system will remain in programming mode until a
2nd key is cycled closing the procedure.


or if prox system

Before ADDING a PROX make sure you have at
least one of the 2 already working PROX available.
This is because of the way MAZDA designed the
system.
Before the PROX that has been added will work
properly the engine MUST be started with TWO
prox keys.
If you ADD a Prox but DO NOT have the other
PROX available the new prox may not work properly
until the engine is started with each of the 2
PROX KEYS.
The process can be completed later by starting the
engine with the other prox but this is something to
be aware of as your customer will likely NOT be
happy until everything works as designed.

[dekimin]

Hi

Use 4d63+

[Friends4eva]

Used an original chips, the car starts no problem,

thanks all

[R2D2R2]

Any solution for smart cards AKL ( mazda 5 / 2006 / KEYLESS CARD ) ? neiman ALWAYS locked with mechanical virgin key !

<a href="https://www.youtube.com/watch?v=WMV3Q6SFDrc">
https://www.youtube.com/watch?v=WMV3Q6SFDrc (https://www.youtube.com/watch?v=WMV3Q6SFDrc)