egordem3
8th February, 2019, 08:57 AM
Renault clio II 1.2 16v 2003 inmmo flasing starter not running
ECU 8200246734
16607.054
RENAULT CLIO X65 D4F BVR
IMMO UCH-N2
the main problem, keys doesn't work immo lamp is flasing in UCU paramerters immo is not active
i tried connect the keys by launch tester and it got an error in immo the error is DF067 Ring>decoder connection,invalid key(
i have check the ring and key with oscilloscope and they are work
in my opinion the firmware of the UCH-N2 is corrupt, eeprom there is 93c66 and ECU eeprom is 95080
i programed a virgin eeprom in 93c66 but cannot connect keys with UCH-N2 and lamp of immo dont flashing meanwhile in my own firmware it shows connection is success
May be dio You have the two files for ECU 95080 and UCH-N2 93c66 or any solutions with my car?, thank You!
ECU 8200246734
16607.054
RENAULT CLIO X65 D4F BVR
IMMO UCH-N2
the main problem, keys doesn't work immo lamp is flasing in UCU paramerters immo is not active
i tried connect the keys by launch tester and it got an error in immo the error is DF067 Ring>decoder connection,invalid key(
i have check the ring and key with oscilloscope and they are work
in my opinion the firmware of the UCH-N2 is corrupt, eeprom there is 93c66 and ECU eeprom is 95080
i programed a virgin eeprom in 93c66 but cannot connect keys with UCH-N2 and lamp of immo dont flashing meanwhile in my own firmware it shows connection is success
May be dio You have the two files for ECU 95080 and UCH-N2 93c66 or any solutions with my car?, thank You!