Toyota yaris Bosch 0261208036

[Rito]

Customer lost all keys.

I read ECU 95080 and produce key AVDI original tool but car not start.
I use transponder 4C.

It must be produce from immo box??

Car only have all this modules and not looks immo box.

Thanks

[lion0304]

Key in ECU for sure, but eeprom need read off circuit.

You post eeprom without tiris data, what do you expected?

[Rito]

Key in ECU for sure, but eeprom need read off circuit.

You post eeprom without tiris data, what do you expected?

I am read it off circuit, I remove epron and read UPA...
What you mean tris data??
What I must to do now?

Thanks

[lion0304]

Read your key by zedbull, and post tiris data stream from 4C key.

Without that, how someone can check or help you?

Try this file i modifie

[Rito]

Ahh ok thanks to learn about, I never done lost all keys Toyota..

Here are tiris:

[lion0304]

Ahh ok thanks to learn about, I never done lost all keys Toyota..

Here are tiris:

Here your key added

[Rito]

I write your dump, but car not start...
Any more solution for it??

[droidwayne65]

I write your dump, but car not start...
Any more solution for it??
Do you have the original dump you read? The posted dump looks like someone already tried to add the key data you posted.

Well, here it is, with the data added as Key 1, using standard checksum algo. Can't tell from this bin whether Toyota uses some variation but it's easy enough to check.. :biggrin:

[Rito]

Yes it are original dump read UPA.

What you think??

[droidwayne65]

Yes it are original dump read UPA.What you think??Quite a coincidence that key data is so similar :D. Well, try the bin posted above and share your findings.

[lion0304]

Try this seconde key add. Same pass

Your original dumps already magnipulated

[Rito]

Maby ECU is dead, car not start and not do Diagnostic..

Customer fund new ECU and I try done again Key in Key tool Abrites, but not start, but not do Diagnostic.

Can calculate new file to this key??

Tris: 7ED587CA0A000000
00DA417E0000

Thanks

[droidwayne65]

Maby ECU is dead, car not start and not do Diagnostic..Customer fund new ECU and I try done again Key in Key tool Abrites, but not start, but not do Diagnostic.Can calculate new file to this key??Tris: 7ED587CA0A000000 00DA417E0000ThanksHave you scanned both ECUs for trouble codes? Does the new one give diagnostic data?

[Rito]

Have you scanned both ECUs for trouble codes? Does the new one give diagnostic data?

Yes, Old ecu not do diagnostic, new ecu do diagnostic ok, only says immobilizer

[droidwayne65]

Yes, Old ecu not do diagnostic, new ecu do diagnostic ok, only says immobilizer
Did you get it sorted out?

[Rito]

Did you get it sorted out?

Yes Now is resolved; I activate software to Tango and it work now...

[droidwayne65]

Yes Now is resolved; I activate software to Tango and it work now...
Good! .... :)

[epasha]

Hi I have Toyota Yaris with ecu 0261208 036 car have fault b2796 no comunicacion in immobiliser system. I think the electronics in the antenna of the key is damaged but I can't find it. Can be immo removed.

[epasha]

Hi I need ecu diagram for, I have diagram but it is for Denso ecu!