Need virgin Citroen Sid803A eeprom dump from ECu

[Jancis]

Hi,

Can somebody make virgin attached dump from SID803A Citroen Ecu.
Old Ecu not go to communication with diagnostics, this one is from donor.
To paired this donor ecu to bsi need pin and it need be virgin, right?
I calculate than pin is : FCVB

[rafal]

have you tried synch with lexia ?

[waldi1979]

Write this file and use Lexia to learn ECU.

[Jancis]

tried with lexia and diagbox... very long time thinking and nothing. Also tried adapt key, response negative

[vasa]

Sid803a you can adapt 3 times with know pin from old ecu. Lexia PP2000 diagbox support exchange used ecu tested on PSA version diagbox was 7.02 new update I don't know. No need virgin. Files for ecu only pin from car and pin from used ecu

[Jancis]

What about BSI, it also need virginize or not?
Mr. waldi1979... please pass from archive.

[waldi1979]

BSI no....

[Jancis]

Sid803a you can adapt 3 times with know pin from old ecu. Lexia diagbox support exchange used ecu tested on PSA

adapt donor ecu with old ecu pin or adapt donor ecu with it pin? something is wrong with old ecu, because half of car engine room burned.

[waldi1979]

Write my file and adapt ecu with old pin.

[Jancis]

ok, thank U m8 for help, tomorrow I will try pair donor ecu (with bad ecu pin) with BSi and then I will give answer

[vasa]

Try to adapt used ecu without virgin dump.it is 2 steps program show ecu is adapt on other car will you new adapt? Yes write pin for ecu then write pin from car that's all. Coding injector etc. And drive on holiday :-)

[Jancis]

Diagbox ask validate replacement ecu, process take 20 min, but nothing happen. Maybe I do something wrong? No password aski g till this moment somewhere...
I also tried do with lexia, yes here in ecu repair is one moment where ask for some after sales security code, but my old one or new not validhttps://uploads.tapatalk-cdn.com/20190209/19a41ea650dae90c23c0e4fd1f887f7f.jpg

https://uploads.tapatalk-cdn.com/20190209/9deddac75e60c4b24361f09a599e7e4c.jpg

[waldi1979]

I think you can't adapt ECU that was used to the car. And that's why you need write virgin file.

[Jancis]

I writed your virgin dump in donor ecu and tried to pair, but here is pictures from process.... Lexia also show when donor ecu is with RH drive car..and show message when not support this type of ecu. With diagbox tried validate, but nothing, push the button for accept donor ecu..think process star, than wait 20 minutes, but nothing happen.
I really havn't more ideas how to pair Bsi with donor virgin ecu

Sent from my Redmi 4 using Tapatalk

[waldi1979]

Try this file.
Pass the same.

[Jancis]

Again nothing...lexia make diagnostics, than I take ecu...lexia show than ecu is fitted for RHR and need validate. When I try to validate then get reponse than function not available on this ecu version.
Diagbox global test find modules, then I take ecu - pack repair-replacement parts and take replacement of the engine managament ecu and do all procedures, but here after replace ecu and push the button for validate, nothing happenhttps://uploads.tapatalk-cdn.com/20190210/9ea29d2930fd9caca4901111000734cb.jpghttps://uploads.tapatalk-cdn.com/20190210/6ba40b4e36e3df9d1519d738df32821e.jpg

Sent from my Redmi 4 using Tapatalk

[waldi1979]

Do you have correct pin from bsi? You wrote in 1st post "I calculate than pin is : FCVB"
This PIN is from donor ECU, not from your car.

[Jancis]

For my car - old ecu pin is C7HS and I tried tu use it, but without results

[rafal]

For my car - old ecu pin is C7HS and I tried tu use it, but without results

post file from ori ecu and we will see pin........................

[Jancis]

Here594903

Sent from my Redmi 4 using Tapatalk

[kiszka]

Here594903

Sent from my Redmi 4 using Tapatalk

...C7HS..is pin

[Jancis]

right, the same as I said.

One more thing, maybe bsi flash file with it signature not correct? As user Doctor say, previous flash file in bsi was no real one it should be.

[rafal]

pin is correct.................

[kiszka]

right, the same as I said.

Sent from my Redmi 4 using Tapatalk
show me eeprom bsi, to which you log in

[rafal]

show me eeprom bsi, to which you log in

it can be right direction.......................

[Jancis]

look here with signature DC04

[kiszka]

which model bsi is valeo jc siemens

[Jancis]

It is JC bsi

[kiszka]

It is JC bsi
pin is ok C7HS

[rafal]

C7HS from bsi is correct

[Jancis]

ok, than where is problem? and one more... car no ignition from ignition key ring to Ecu. To one of ecu connector come red + wire. If I connect this red wire to battery +, than I have diagnostics accept to ECU, but if I take off this wire , than havn't.
If I turn key in ignition switch and push some of key button than car ventilation start.
I think maybe is some problems with bsi configuration or bsi software, maybe it not correct?