jastr
11th February, 2019, 11:05 PM
Hi i have a problem reading med17.5.1 with ktag clone.
It has no probe connection in ktag so don’t really dare using the probe as with other EDC/Med17 ecus that solution worked several times.
So for this ecu ktag says connect with cable. I was so confused i ended cutting my cable and soldered it to the pins to make sure it had good connection.
https://uploads.tapatalk-cdn.com/20190211/c9b63f13039ea1be7763c51b6700a89f.jpg
Even after this i still get this error
https://uploads.tapatalk-cdn.com/20190211/d491a78d3db9f36204217878a4039d2e.jpg
I am feeding it 12v 3a should be enough and as mentioned before been used on several other ecus from same family.
The cable i was told had a problem on clones the can wires should be switched so even that solution i tried.
https://uploads.tapatalk-cdn.com/20190211/a39301748d6717c40b990c5a88cd1012.jpg
So right now i am at a point with no more great ideas. Is anyone able to help me with a possible solution to why this want read.
Ktag PCB
https://uploads.tapatalk-cdn.com/20190211/5c9c812fcf16748285769cca850886df.jpg
https://uploads.tapatalk-cdn.com/20190211/2831e3d2092001321231eb30b22393f4.jpg
https://uploads.tapatalk-cdn.com/20190211/9aab7842dccf5ae3926f5d386de8b78d.jpg
It has no probe connection in ktag so don’t really dare using the probe as with other EDC/Med17 ecus that solution worked several times.
So for this ecu ktag says connect with cable. I was so confused i ended cutting my cable and soldered it to the pins to make sure it had good connection.
https://uploads.tapatalk-cdn.com/20190211/c9b63f13039ea1be7763c51b6700a89f.jpg
Even after this i still get this error
https://uploads.tapatalk-cdn.com/20190211/d491a78d3db9f36204217878a4039d2e.jpg
I am feeding it 12v 3a should be enough and as mentioned before been used on several other ecus from same family.
The cable i was told had a problem on clones the can wires should be switched so even that solution i tried.
https://uploads.tapatalk-cdn.com/20190211/a39301748d6717c40b990c5a88cd1012.jpg
So right now i am at a point with no more great ideas. Is anyone able to help me with a possible solution to why this want read.
Ktag PCB
https://uploads.tapatalk-cdn.com/20190211/5c9c812fcf16748285769cca850886df.jpg
https://uploads.tapatalk-cdn.com/20190211/2831e3d2092001321231eb30b22393f4.jpg
https://uploads.tapatalk-cdn.com/20190211/9aab7842dccf5ae3926f5d386de8b78d.jpg