Ktag clone reworked problem - Med17.5.1

[jastr]

Hi i have a problem reading med17.5.1 with ktag clone.

It has no probe connection in ktag so don’t really dare using the probe as with other EDC/Med17 ecus that solution worked several times.

So for this ecu ktag says connect with cable. I was so confused i ended cutting my cable and soldered it to the pins to make sure it had good connection.

https://uploads.tapatalk-cdn.com/20190211/c9b63f13039ea1be7763c51b6700a89f.jpg

Even after this i still get this error

https://uploads.tapatalk-cdn.com/20190211/d491a78d3db9f36204217878a4039d2e.jpg

I am feeding it 12v 3a should be enough and as mentioned before been used on several other ecus from same family.

The cable i was told had a problem on clones the can wires should be switched so even that solution i tried.

https://uploads.tapatalk-cdn.com/20190211/a39301748d6717c40b990c5a88cd1012.jpg

So right now i am at a point with no more great ideas. Is anyone able to help me with a possible solution to why this want read.

Ktag PCB

https://uploads.tapatalk-cdn.com/20190211/5c9c812fcf16748285769cca850886df.jpg
https://uploads.tapatalk-cdn.com/20190211/2831e3d2092001321231eb30b22393f4.jpg
https://uploads.tapatalk-cdn.com/20190211/9aab7842dccf5ae3926f5d386de8b78d.jpg

[Cyrez]

Please post Picture of wiring. I think the Connection is not right. Please also send Picture from used bootpin an ecu number.

[jastr]

Med17.5.1

Connection according to Ktag diagrams?

[Myjector]

595210
Connect it like this

[Cyrez]

595210
Connect it like this


Picture is not possible to open.

[Cyrez]

595215 Please check you wiring on ECU. Ist not possible to recognize where are the cables located on first Picture you posted.

[cawadany]

Red small it's in wrong pin! It's +12V. I hope you have not bricked your ecu.