View Full Version : Edc7uc31 from 2017 year need connection on Bench
258
13th February, 2019, 04:20 PM
Hi,
Have anyone right connection for this ecu ed7uc31 on bench for read, this ecu installed on iveco diesel at 2th engine Sweeper Engine type F4HFE413M , read over obd not possible. I found connection in Forum, but i dont know is this connection for FGTech ok?
Gesendet von meinem G8231 mit Tapatalk
https://uploads.tapatalk-cdn.com/20190213/c48a906c45a34c6bec6afc49960e5f9a.jpg
258
14th February, 2019, 03:26 PM
no one have connection for this ECU?
alcorte
14th February, 2019, 07:39 PM
why dont you try with kess? only about 80€
258
14th February, 2019, 07:48 PM
why dont you try with kess? only about 80€Have kess connection on Bench?
Gesendet von meinem G8231 mit Tapatalk
Babos
14th February, 2019, 07:56 PM
I buy conection to BDM around 400e for that ecu :D
258
14th February, 2019, 07:58 PM
I buy conection to BDM around 400e for that ecu :DConnection for Top side or for under site?
Gesendet von meinem G8231 mit Tapatalk
maucontacto
14th February, 2019, 08:25 PM
Here is. Post results
Babos
14th February, 2019, 08:58 PM
Connection for Top side or for under site?
Gesendet von meinem G8231 mit Tapatalk
ecu top side
greyg
15th February, 2019, 06:32 AM
no one have connection for this ECU?
FGtech via BDM. The connector is located on the bottom.
Babos
15th February, 2019, 08:21 AM
FGtech via BDM. The connector is located on the bottom.
Yes standart BDM port is located there but 258 ask about pinout not port ;)
greyg
15th February, 2019, 08:58 AM
Yeah. Correction.
258
15th February, 2019, 09:26 AM
That's what I have searched. Thanks greyg
258
18th February, 2019, 12:09 PM
Hi,
I have tested for this ECU working connection on Bench without openning it and work over OBD pinout with Kess protocol 307.
Thanks to all.
luiggii79
17th March, 2019, 11:54 PM
this photo cut house of ecu for location bdm pins.the scale is metric have
baltazar3
18th March, 2019, 10:02 AM
this photo cut house of ecu for location bdm pins.the scale is metric have
This is NOT recommended mate ! This ECU is cooled by fuel on this side.
synmnicha
18th March, 2019, 11:39 AM
This is NOT recommended mate ! This ECU is cooled by fuel on this side.
Depends on vehicle...
luiggii79
19th March, 2019, 06:46 AM
not cooled all type engine . i disconected the bord from two ecus and both damaged it! i dont recomend disconect pcb .
antreas1991
6th April, 2020, 07:33 PM
anyone use CMD to read it?
antreas1991
6th April, 2020, 07:34 PM
I buy conection to BDM around 400e for that ecu :D
what connections you bought mate?
antreas1991
6th April, 2020, 07:35 PM
Here is. Post results
password for rar file?
sacreddoctrine
1st August, 2022, 08:54 AM
Send me password mate! rate+thx=add
sacreddoctrine
1st August, 2022, 08:57 AM
Yeah. Correction.
unable to download, please update links
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.