Should i buy a carprog?

[melmar]

:help:I am using a usb-upa for airbag module reprogramming and i'm thinking of investing in a carprog to help with CR16 chips, Could somebody who has one please tell me if there are any issues with coverage/ reliability/ or support. Many thanks in advance

[cucaracha]

I have for VAG and until the moment only positive feedback.

regards

[milanoffracing]

I have Carprog too, support is good.

[Thor2]

I use carprog for VAG with no problems and support is first class .

[Jose19]

:help:I am using a usb-upa for airbag module reprogramming and i'm thinking of investing in a carprog to help with CR16 chips, Could somebody who has one please tell me if there are any issues with coverage/ reliability/ or support. Many thanks in advance
Hi

Yes, is the best choise, i have and work very well
and they have a fast replay on any doubt .

Jose

[melmar]

have now ordered one.. thank you all again!!!

[morfeo]

interesting! if I buy full version for Airbag, what ECU are supported?

[jimthejock]

it is easier to look on the website they have www.codecard.lt (http://www.codecard.lt) as it has listings for vehicles and modules for you to look at

[MAXIMUS1000]

I have the CARPROG too and support is the BEST....

Cheers

[vyk]

Ok Maximus ...
But how is it like tool?
Makes the money? ... because the price is not quite cheap.

Regards.

[melmar]

:party:Thank you all for you assistance,, have been using carprog , and it does all that was promised.. Nice, quick and easy! Has paid for itself already...

[melmar]

Will check it out.. thamk you

[amrif]

Maybe someone when they will release support for Audi with micronas?

[the_riddler]

why not buy basic unit, good price.. with a couple of adaptors that you will use regularly, then if you like it, then buy more adaptors as you require them.

[lwood]

i just bought my carprog, i have a question for you guys that have it.. where do i get all the clips and cable for the adapters?? what is a good website?


where do i buy the clips to connect the adapter to the chips?
see picture.
http://img39.imageshack.us/img39/1731/img0147k.jpg (http://img39.imageshack.us/i/img0147k.jpg/)

[busaman]

you have to solder them on to the ic i solder pins on the cables then solder the pins to the ic it is much easier.

[lwood]

yes i figure it out. i bought some crimp pins. solder them on.

[autoelectric]

Hello m8s
I m thinking of buying a full carprog.
Did anyone use it to retreive immo pins from opel ecus.
If yes can you please tell me if it works ok.
Also for reseting airbag control modules the coverage is good or do i have to buy some other tool.:hmmmm2:
Thanks in advance.

[lwood]

i have it for reseting srs. i love it.. you just need to buy a adapter to read from eprom 95640.


Hello m8s
I m thinking of buying a full carprog.
Did anyone use it to retreive immo pins from opel ecus.
If yes can you please tell me if it works ok.
Also for reseting airbag control modules the coverage is good or do i have to buy some other tool.:hmmmm2:
Thanks in advance.

[domel45]

Have questions about Opel ECU read directly connected to the Carprog. I would not damage or hardwaera or ECU.


To which the pin-out i must connect (with OBD II connector or carprog hardware) +12 V, Ignition +12V,K-Kline,GND while reading ECU Opel.

Can ignition +12v i must connect to a external +12v or for 12 v at startup reading?

I attached bmp file, can you write correct connection?
http://images50.fotosik.pl/331/2e2872db25c0af23m.jpg (http://www.fotosik.pl/showFullSize.php?id=2e2872db25c0af23)

[sonebmw]

Hi guys , I have bin recently start doing a reset of airbag modules and I bought some chip tool as Carprog/china,UPA.

After couple of jobs I have bin done I realize tha I need some better tool for cars after 2010 because I have more job with new cars.

Can anyone give me suggestion about what device I need to buy to be able to fix new age SRS module,read,whrite ?

thank you all !!!