PDA

View Full Version : 2015 canter fuso truck



rtbdiagnostic
18th February, 2019, 06:01 PM
hi anybody can assist with rear pinout of this 2015 mitsubishi canter fuso dash or best to remove neeldles any look for chip 93c56 see images attached
Advice be appreciated

hcip
18th February, 2019, 06:18 PM
The stepper motor in not so fragile like honda stepper motor,
take out the needles by twisting clockwise & counter clockwise while pulling it...

rtbdiagnostic
18th February, 2019, 06:50 PM
please find my dump mileage 108 696km need 75400km please

hivrich
18th February, 2019, 08:13 PM
Try this file

rtbdiagnostic
18th February, 2019, 08:28 PM
worked 100% - I used Hyundai Accent 93CS56 with Digiprog working fine interesting when I read the chip as 93c56 just ...ff ff ff ........... - I then selcted 93cs56 as eeprom type read and write then 100% - what would be the difference between c and cs chip