Need John Deere radio code

[dziongas]

Hi,

Need radio code

Bosch JOHN DEERE

7620000125 10R-04 6092
905 CM0125 H 4257953

Thanks!!!!

[audio]

Hi!

If you don't try it out, you'll never know how to decrypt the code. :D

try code: 1762

[dziongas]

not working

[masterskay62]

not working

Hi.
try......9762

[Rdecode]

597288

Code is 5364

[lstarblue]

Hi,

Need radio code

Bosch JOHN DEERE

7620000114 10R-04 6092
905 CM0114 F 3625705
Thanks!!!!

[bogege]

Maybe 1153

[szpectronik]

Hello, is anyone able to help with the code for the Bosch John Deere radio giving the numbers from the sticker thanks
905
CM0114F3526189
7 620 000114
10R-04 6092

[smoggy]

Hello, is anyone able to help with the code for the Bosch John Deere radio giving the numbers from the sticker thanks
905
CM0114F3526189
7 620 000114
10R-04 6092
try code 2416

[Crasftsman]

Hello, is anyone able to help with the code for the Bosch John Deere radio giving the numbers from the sticker thanks
905
CM0114F3526189
7 620 000114
10R-04 6092

try.......0072

[szpectronik]

code 2416 code error
is the code and meter stored in eeprom 95320 because the tests may end

code 0072 code error

[Walter2011]

Code is 1072

[szpectronik]

1072 code error

is anyone able to generate 100% good code the code is in eeprom?

[treran21]

read eeprom 95320 and dump here

[szpectronik]

EEprom 95320

[bogege]

Code from dump is 1234

[szpectronik]

no is code 1234 button 5 2 second hold code error

as I got the radio connected and after switching on the inscription blocked after holding the menu button 0000 appears, code 1234 and displays code error and blocked. after switching off and on the history repeats itself reading is the first after getting the radio

[treran21]

read the EEPROM 95320 again and dump here

[szpectronik]

maybe something will guide the meter can be in byte 0D84 and 0D8A in these two places there is a change after entering the wrong code

[treran21]

not sure ... try code 5261, 6189, 8915, 1507

and also 1625, 9816, 5198, 7051, 6152, 8961, 1589, 0715

[Raimax]

Try code 4761

[Raimax]

maybe something will guide the meter can be in byte 0D84 and 0D8A in these two places there is a change after entering the wrong code


You are doing something wrong. The blocking in these dumps has not changed

[szpectronik]

I do not know if the problem is inscription blocked at the beginning ?? I came across a description of the same radio visually nothing described about blocked and only three attempts and the inscription 1 hour wait gives the link
https://usermanual.wiki/Robert-Bosch-Car-Multimedia/ROTT1324

(https://usermanual.wiki/Robert-Bosch-Car-Multimedia/ROTT1324)I think the problem is the inscription blocked, after turning on the radio, it is possible that someone has already used all the tests ... is this change in eeprom a counter ??
maybe something will guide the meter can be in byte 0D84 and 0D8A in these two places there is a change after entering the wrong code

(https://usermanual.wiki/Robert-Bosch-Car-Multimedia/ROTT1324)

[szpectronik]

not sure ... try code 5261, 6189, 8915, 1507

and also 1625, 9816, 5198, 7051, 6152, 8961, 1589, 0715

4761
all code error

[szpectronik]

no one will help?
I see there was a similar topic on the forum but I can't download the dump rar to compare

https://www.digital-kaos.co.uk/forums/showthread.php/724290-John-Deere-Bosch-Blocked

[shooting]

no one will help?
I see there was a similar topic on the forum but I can't download the dump rar to compare

https://www.digital-kaos.co.uk/forums/showthread.php/724290-John-Deere-Bosch-Blocked

Your dump is "VIN & PIN" ... change VIN to your VIN and use PIN 1234.... done!

wbr

[szpectronik]

schooting you can be right with vin and pin, but I have a question radio is from a tractor that has vin 17 digits, and now the radio is to be in john deere combine harvester that has vin 13 digits Z02256H068448 what to write for the missing digits vin?, 00, FF? I can ask you to rewrite the bin file if you know how to do it. Maybe you could do bin file adaptations to vin ?? after writing the code, thanks


I do not have a machine available to test myself, I asked the client, he said that the radio blocked after the second time when the voltage was removed when he tried to mount it to the combine

[shooting]

schooting you can be right with vin and pin, but I have a question radio is from a tractor that has vin 17 digits, and now the radio is to be in john deere combine harvester that has vin 13 digits Z02256H068448 what to write for the missing digits vin?, 00, FF? I can ask you to rewrite the bin file if you know how to do it. Maybe you could do bin file adaptations to vin ?? after writing the code, thanks


I do not have a machine available to test myself, I asked the client, he said that the radio blocked after the second time when the voltage was removed when he tried to mount it to the combine

I sent you solution in PM

wbr