PDA

View Full Version : Need checksum correction for EDC15C13



r3volman
19th February, 2019, 08:14 PM
Hi.
Renault Trafic 1.9DCI
ECU EDC15c13 0281011529
After download this firmware the car doesn't start.
Need ckecksum correction. Thx.

tunelab
19th February, 2019, 08:35 PM
hi mate your checksum are ok in your posted file

r3volman
19th February, 2019, 08:46 PM
hm..interesting..why car didnt start?
Read/write by mpps v18 as trafic edc15c2 without any problems..

tiugrikas
19th February, 2019, 08:52 PM
hm..interesting..why car didnt start?
Read/write by mpps v18 as trafic edc15c2 without any problems.. all should be ok cause I done few edc15c13 as edc15c2 with mpps 13 and all perfect

tunelab
19th February, 2019, 09:19 PM
in case if your checksum not ok then you will not have communication with ecu if you read write ok then sure you have other problem

r3volman
19th February, 2019, 09:28 PM
in case if your checksum not ok then you will not have communication with ecu if you read write ok then sure you have other problem

Exactly! After upload this firmware i could not connect to ECU. Only bdm will help me in this situation?

calibracbr
19th February, 2019, 09:53 PM
Try boot mode with original file

r3volman
19th February, 2019, 09:59 PM
Try boot mode with original file
Ok, ill try and report tomorrow. Thanks!

r3volman
20th February, 2019, 01:23 PM
Try boot mode with original file
Boot mode helped me! Thank you very much for helping.
But anothert problem was happened. With this firmware engine doesn't start.