Opel Corsa D 1.3 CDTI Full BDM Need

[marcolr]

Hi mates,

I need a full BDM read of a Magnetti Marelli
55568383KZ
MJD 6O3.S3/HW03A/3333-S362
S4400 Z13DTJ MT

The problem is that the original ecu is water damaged and all data inside of Mpc is FF.
I get a used ecu with same HW number, but sw is 3137-S360 and if I reset ecu and adapt it to the car, the car starts but P060B (change ecu) come and the engine is limit to 1500rpm.
I can´t clone with original data because I don´t have the original Mpc data.

It´s very important the sw 3333-S362

Thanks in advance

[looly]

Im sure I have this data, will try to find it for you. In meantime do you have global tis? If you do then sps programming should be able to help you.

[marcolr]

I don´t have global tis, but I try just now with data of a Meriva with same hw number and sw 3333S381. Write full bmd, reset ecu, program immo and by the moment seems to be ok. The P060B disappeared and the engine rpm are not limited now. Tomorrow I´ll try the car on the road and see what happens.

But if you have full bdm with 3333S362 I apreciate if you can upload it.

Thanks

[Sapuhin]

Hi mates,

I need a full BDM read of a KTAG
55568383KZ
MJD 6O3.S3/HW03A/3333-S362
S4400 Z13DTJ MT

Thanks in advance

[marcolr]

Hi mates,

I need a full BDM read of a KTAG
55568383KZ
MJD 6O3.S3/HW03A/3333-S362
S4400 Z13DTJ MT

Thanks in advance

Hi mate. Here is your files.
I read it with BDM100, but I uploaded 4 files for you (All, Mpc, Flash and Eeprom), then you can use it with Ktag.

Regards

[Sapuhin]

Hi mate. Here is your files.
I read it with BDM100, but I uploaded 4 files for you (All, Mpc, Flash and Eeprom), then you can use it with Ktag.

Regards
Thanks, can there be full BDM KTAG 3333S381?

[marcolr]

Thanks, can there be full BDM KTAG 3333S381?

The same as before. Data was read with BMD100.

Regards