Megane sirius 32 i**o off

[Alfik]

Hi all.
I need help with i*mo off. Megane 1.6 16V 1999 Sirius 32 S110030034. Thanks. Alfik

[yasser]

Here try this
it is exactly for Sirius 32 16V


Pass on PM

[dunkler]

Tried and the car won't start. I already cuted pin 58 but the led keeps blinking

[busaman]

is it 32 or 32n.

[dunkler]

is it 32 or 32n.

I have 32 w/o N so the wire is ok?

[yasser]

Tried and the car won't start. I already cuted pin 58 but the led keeps blinking


Of course it will blinking, because key is learned in bcu under fuse box . This bcu gives signal to ECU., So if car is now starting you have to open dashboard and cut led.

By the way before 2 day I tryed to make immo of on same car.
It was with Sirius 32. I decoded it using Renault Decoding Tool, then cut 58 pin wire, but can not start.
Car was have problem with BSI under fuse box. There was water inside. I repire it, but to be sure, that even a problem again in this BSI again , the car will start, so that why i tryed to make immo off.

[wasil1971]

Of course it will blinking, because key is learned in bcu under fuse box . This bcu gives signal to ECU., So if car is now starting you have to open dashboard and cut led.

By the way before 2 day I tryed to make im*o of on same car.
It was with Sirius 32. I decoded it using Renault Decoding Tool, then cut 58 pin wire, but can not start.
Car was have problem with BSI under fuse box. There was water inside. I repire it, but to be sure, that even a problem again in this BSI again , the car will start, so that why i tryed to make im*o off.


immotoll 1.

[yasser]

Immo tool af course will do the job for clearing, BUT.....
before 2 weeks another Renault Megane1 phase2 came to me with same problem - clearing immo.
I cleard woth immo tool, then cut immo line and car DON'T start.
Then I found that for this sirius32 ( with ar without "N") must connect immo emulator. I found guy to sell and ofcourse I buy immo emulator and connect to car. So now car is starting perfect.

[luks17]

sirius 32 its the same ecu than clio rs172 right?

[AC_SHNITZER]

all sirius 32 (except 1.4 ) need an emulator to work

[RunRabbit]

all sirius 32 (except 1.4 ) need an emulator to work

As above, you'll need one of THESE (http://www.tek-tronics.co.uk/product_info.php?products_id=80)

Only the Kangoo Van Sirius 32 will work without an emulator

[naikintuvas]

Hi
I need help with imo off,or clear.I add another control unit, because the old control unit is not Megane 1.6 16V 1999 Sirius 34 S11830111A. Thanks.

[olecram]

Hi guys, i have a trick to make all sirius 32 start. After programming the 29F200, i lift the pin number 43 from 29f200 (Write enable#) and i connect to 5V (pin number 23 from 29F200). The engine starts and when the ecu wants to modified the 29F200, it won?t because we disable the writing. Make sure that you program a good dump from the correct engine. I have 4 categories.
- 1.6 8V with A/C
- 1.6 8V without A/C
- 1.6 16V with A/C
- 1.6 16V without A/C
These are all engine types with sirius 32 in my country.
I use one dump for categories, so i only keep in my desktop 4 files.
If someone want any (or all) immo off dump from this ecu, PM me.

Here are some dumps for Sirius32
http://www.digital-kaos.co.uk/forums/f135/trick-skip-emulator-all-sirius-32-a-142624/

[Jeanhdo]

Hi all.
I need help with i*mo off. Megane 1.6 16V 1999 Sirius 32 S110030034. Thanks. Alfik
Try and report.
Cut line 58 .

[cardoctor]

hi here solutions sirius32:coffin:

[vevepatronu]

all sirius 32 (except 1.4 ) need an emulator to work

you are wrong my friend ;)

[busaman]

you are wrong my friend ;)

i aggree i have done them without.

[jaca4591]

Yes. Can do without emulator but sometimes is probem with A/C. I always use the emulator.

[angmar]

Hello to fill with ff from 04000 to 07fff is safe 100% and to cut pin58 , nothing of emulators .
BR

[looly]

Hello to fill with ff from 04000 to 07fff is safe 100% and to cut pin58 , nothing of emulators .
BR

Hi

Does this also apply to sirius 32N ?

Thanks.

[angmar]

Hello , yes this work , you backup the original file after fill
Br

[pnj]

Hello Have problem with Renault Scenic from 1999 Gasoline 1.6

Loosing keys all the time can not start, need to install immo emmulator

Car is equiped with

siemens ECU S115300121 RENAULT HOM7700875745

Car does not start after applaying emmulator to k-line and cutting wire

Heard that Ecu mneed to be decoded first to make it start, can anybody please help here ?

If same as make virgin virgin dump would be aprociated.

Or is decoding tool only way out here ?

Thanks in advance

[racin-snake]

decoder leaves immo in a virgin state code has to be sent and recorded by the emulator
there are lots of files here for desoldering the 29f200
flash prom
flash prom with a dump from here (if you search)
and resolder the chip cut pin 58 and free running ecu no emu needed
hope it helps

[pnj]

Thanks

One thing ECU is coated type please see pic

If I have to work at flash I need to remove coating can you say where to dick as, I 100% sure will start wrong place.
Also pls confirm still possible with this type og ECU else the decoding tool perhaps better here ?

[racin-snake]

this is a fenix 5 ecm 55 pin
there is a post if youi search shows how to flash pins on the mcu
and where to cut the rubber away
also this ecm will run free without emulator if decoded with renault decoder just cut immo line from uch
this is a simple one with the help of a post here on DK