Hilux 2016 Odometer keeps jumping back.

[filiprow]

Hi guys!

I am stuck here, after a few trials I cannot get the odometer to stay on the correct mileage. Programming was successful and I put everything back. After a test drive of 5km everything was good. Left the car for 30 minutes and when I turn the ignition ON the kilometers jump back by 5km to what I programmed.

I am attaching the original file with roughly 64.000 km.

Need 51.800 km please.

Thank you boys

[jjservice]

try this mate

[filiprow]

I sent the customer on a long test drive of 100km+ and if the problem persists I'll try your file.

Thank you

[clusters]

Original 64150 km

The problem you have is whatever you used to program the mileage did not correct everything.

It's not just the first 17 Words, the next 17 Words have to match. ;)

Ignore jjservice file, it's garbage.

[claudio1987]

hello the same thing happens to me the mileage goes back to the previous thing the first 17 letters are the same and then the other 17 are ff will it be ok?

Enviado desde mi SM-A505G mediante Tapatalk

[jomberykaso]

hello the same thing happens to me the mileage goes back to the previous thing the first 17 letters are the same and then the other 17 are ff will it be ok?

Enviado desde mi SM-A505G mediante Tapatalk

Where is your file posted ?

[Meat-Head]

Partly on topic:-

member x in the year y had similar issues was due to 16-bit /8-bit eeprom
put orginal file abd write tge opposites 16/8 bit

[filiprow]

Since the time it happened to me I worked out a solution as well. If you need help post file.