View Full Version : Sensor present passager BMW E46
Jose19
12th December, 2009, 02:42 AM
Hi to all
Someone have solution for sensor present emmulater working for BMW E46 ?
BR
Jose
Babanovski
12th December, 2009, 01:35 PM
Here is 100% working solution
Meat-Head
12th December, 2009, 02:37 PM
Yeah Meat-Head Motors found just a diode works on the E36, don't know about E46
What about the Merc 3 wire ones!
yasser
12th December, 2009, 04:24 PM
Mercedes is Mercedes!!!
2 options:
1. replace with new original seat occupation sensor.
2. replace with EMULATOR for seat occupation.
About BMW E46, E38, E39
I use only diode
white---|>|----blue
anode catode
1N5408
Jose19
12th December, 2009, 05:35 PM
Hi
Thank you for the tips.
Jose
tecnoracing
12th December, 2009, 07:24 PM
{REPORTAGE} Spegnere la spia airbag per tappetino passeggero - BMW passion Forum (http://www.bmwpassion.com/forum/showthread.php?t=122468)
cammy25
15th December, 2009, 01:02 PM
to be safe do it like this..
melcool
15th December, 2009, 10:48 PM
to be safe do it like this..
cammy25 this scheme is NOT SAFE because the Airbag Light will go OFF... BUT the seat will be UNOCCUPIED/FREE!!!!!tested
kool_mi
19th December, 2009, 04:26 PM
yasser your emulateur works for mercedes type 202 210 2110 203
Meat-Head
19th December, 2009, 07:56 PM
yasser your emulateur works for mercedes type 202 210 2110 203
thought mercedes have 3 wires?
yasser
19th December, 2009, 08:33 PM
yasser your emulateur works for mercedes type 202 210 2110 203
I do not have emulator for mercedes.
This information I know from forums.
If there is problem with mercedes seat occupation sensor there are not easy ways to imitate.
1. buy emulator for it
2. buy NEW oem seat occupation sensor.
No diode, no resistors or similar :-(
| AUTO SERVICE "TMT" - ODSE | (http://www.tmt.lt/odse_en.html)
Mercedes Benz occupied seat recognition sensor emulator on eBay (end time 04-Jan-10 19:12:29 GMT) (http://cgi.ebay.co.uk/Mercedes-Benz-occupied-seat-recognition-sensor-emulator_W0QQitemZ130349875602QQcmdZViewItemQQimsx q20091206?IMSfp=TL091206161003r26369)
By the way Fiat Stilo is same like Mercedes :-(
No easy way to emulate, there is special tool for Fiat.
cammy25
20th December, 2009, 04:45 PM
For child seat its safe.
If you never use child seat then just place diode with 47k for ALWAYS occupied
melcool
20th December, 2009, 07:06 PM
For child seat its safe.
If you never use child seat then just place diode with 47k for ALWAYS occupied
you're right cammy25
Meat-Head
20th December, 2009, 11:37 PM
For child seat its safe.
If you never use child seat then just place diode with 47k for ALWAYS occupied
So if you have a dustbin lid and you don't want it to have it's own 'bouncy castle' then what size do you use?
robertrobert
21st December, 2009, 01:27 AM
thought mercedes have 3 wires?
robertrobert
21st December, 2009, 01:55 AM
Hi duds,
i know that the diod with resis.. sound good with BMW coz there no more than 2 wires blue and white.
but any body tested it with mercedes?
coz normally mercedes occupied passanger seats consists of 3 wire plus ground and signal.
helpppppppp
Wyrus
20th January, 2010, 08:41 PM
Here is 100% working solution
Thanks for this simple solution.
Jose19
20th January, 2010, 09:42 PM
Thanks for this simple solution.
Before post your 1? one
Read this ;
Introduce Yourself (http://www.digital-kaos.co.uk/forums/f2/)
Jose
illestibor
10th March, 2010, 11:49 PM
If somebody have problem with BMW e90 seat recognition here is the resolvation.
u must have only 4 rezistors.2*1kohm and 2*1.5kohm.
In e90 u have 2 senzor circuits.the electronic generates impulses and if somebdoy sits at the seat the circuits becames nearest(the 2 plastic circuit(folie)) and transmits the impulses.
but if u transmit the impulses with an resistor u are done and the seat is "ocupated".
With 2 resistors simulate the 2 circuits and with the other 2 u transmits the impulses.
i post the image.good job for everybody.
dimava
24th March, 2010, 08:10 AM
Perfect it?s OK! Fnx
x_tacho
15th September, 2010, 04:49 PM
Here is 100% working solution
jjas40
6th October, 2010, 08:16 PM
hi
anyone knows how to do it in a mazda primacy year 2002 with 3
wire
thanks
tomek020
10th October, 2010, 10:32 PM
for BMW the best is NCS
vanya86
14th December, 2010, 07:42 PM
I have problem with BMW e60 525 seat occupation sensor but i don know how to solve it.
There are 3 (3 white) wires going into black box, 2 ( blue and red) wires to seat occupation sensor.
I tried to put diode and resistor on output ( Red and blue) but same problem, unknown error in DTC
http://webspace.ringling.edu/~dplassma/pics/z3_occupancy_sensor.jpg
BMWKer
28th December, 2010, 01:38 PM
Hi
I take it there is no way to repair these things?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.