Xprog problem

[airady]

Someone could help for me? i read the eeprom and this is the error message . "bad contact pin 6" or similar message.

[fady eid]

check the contact of eprom with the adapter and clean the eprom and adapters , if clone need to resolder or try press on eprom while reading

[brend]

Check pin contact in programmer or you kill this hot air station away!



Someone could help for me? i read the eeprom and this is the error message . "bad contact pin 6" or similar message.

[romecu]

when all time say bad contact in pin 6, 99,99% that you are trying read 93cxx like ST, select other brand, Fairchild 93xxx. Some brand not use pin 6 for R/W, in ST xprog use pin 6 in others not, is for this that you have this error.

[kiszka]

when all time say bad contact in pin 6, 99,99% that you are trying read 93cxx like ST, select other brand, Fairchild 93xxx. Some brand not use pin 6 for R/W, in ST xprog use pin 6 in others not, is for this that you have this error.

pin 6 is ORG
MEMORY ORGANIZATIONT
he ST93C66 is organized as 512 bytes x 8 bits or256 words x 16 bits. If the ORG input is left uncon-nected (or connected to VCC) the x16 organizationis selected, when ORG is connected to Ground(VSS) the x8 organization is selected. When theST93C66 is in standby mode, the ORG inputshould be unconnected or set to either VSSor VCCin order to achieve the minimum power consump-tion. Any voltage between VSSand VCCapplied toORG may increase the standby current value.
598873