PDA

View Full Version : meriva z13dtj active forced regeneration



kospoz
26th February, 2019, 02:36 PM
hi one meriva came today with glow plug warning but without any dtc.I found that when i strating the car then glow plug is on and i saw that forced regeneration is active.Car has dpf off i have the original file and the dpf off file can someone help with this?

pike
26th February, 2019, 05:19 PM
hi, write original file and check car.

AVDigitale
26th February, 2019, 05:24 PM
flash ori file
reset your dpf and sensors
flash back mod file and check if glowplug is gone and no more forced renegation ,if car is the same after your mod file is bad

pike
26th February, 2019, 05:46 PM
and after these actions situation will repeat.

AVDigitale
26th February, 2019, 05:48 PM
not good maked dpf and again will start forced renagtion white some and rpm going to 1100rpm

pike
26th February, 2019, 05:58 PM
for this need working DPF off solution

kospoz
26th February, 2019, 06:10 PM
so this file which have this car is no good?
I have in database same software from same type car and file for dpf off is equal with this.From the car which i did at the past i do not have any problem.Strange

kospoz
26th February, 2019, 06:12 PM
flash ori file
reset your dpf and sensors
flash back mod file and check if glowplug is gone and no more forced renegation ,if car is the same after your mod file is bad
i did this and same thing active while car is starting but without smoke and the regeneration % is at 0 all the time.I will hit the blink light:tears_of_joy:

AVDigitale
26th February, 2019, 06:17 PM
so you need good working dpf file

TuningInside83
26th February, 2019, 07:48 PM
write the original file
reset the parameters of the dpf
write edited file

Try and report
Pass PM