PDA

View Full Version : KIA SPORTAGE 2018


slick_dick
28th February, 2019, 01:22 PM
Hi

Any one have pinout connections for Sportage ecu 95910-F1070 646364200??

I am trying to read XC2361A-72F but the diagrams for similar cars are wrong
talk2idris
28th February, 2019, 02:53 PM
this is the cpt connection

http://carprotool.com/download/Pinouts/CarProTool%20Programmer/CPT%20JTAG%20XC2xxx/KIA-HYUNDAI_2015_v2_JTAG_A.JPG
slick_dick
28th February, 2019, 02:54 PM
not the same bro :(

rst tdi td0 have moved look closely at my board
talk2idris
28th February, 2019, 03:08 PM
wait a min you i found something wrong let me check it again
talk2idris
28th February, 2019, 03:16 PM
i found this
599984
slick_dick
28th February, 2019, 03:43 PM
nice one

now i can connect the dots

lol
talk2idris
28th February, 2019, 03:51 PM
best wishes, and good luck, i know you will get success
seattm2012
29th October, 2019, 09:09 PM
Hi

Any one have pinout connections for Sportage ecu 95910-F1070 646364200??

I am trying to read XC2361A-72F but the diagrams for similar cars are wrong


hello. any have pcb pinout this mcu?
talk2idris
30th October, 2019, 01:19 PM
hello. any have pcb pinout this mcu?


its same as above
frontpager
5th November, 2019, 06:28 PM
Do you have a labeled pinout for this version?
Save me joing the dots !!

Pager.
frontpager
6th November, 2019, 09:58 AM
Do you have a labeled pinout for this version?
Save me joing the dots !!

Pager.

Dots joined . Pic attached.
frontpager
6th November, 2019, 02:36 PM
There's obviously an error in my pic.
Using UPA I'm getting TMS Error - Pin 8.

Anyone know what's wrong?

Thanks
Pager.
frontpager
12th November, 2019, 12:16 PM
Can someone helpme with this please?

Pager.
autocargo
26th June, 2020, 02:59 PM
I'm trying to read same airbag calculator with upa and getting same error (TMS Error - Pin 8)... Is this pinout correct?
autocargo
27th June, 2020, 08:05 PM
Hello. Anybody could tell me correct pin-out on this pcb as it's slightly different from ultraprog one... I circled out the area that is different. One of the shorting points should be there.... Thanks.
slick_dick
27th June, 2020, 10:11 PM
Are you giving the ecu 12v and GND, while trying to read with UPA-USB ??
slick_dick
27th June, 2020, 10:14 PM
Are you giving the ecu 12v and GND, while trying to read with UPA-USB ??

I also remember having to use a pogo probe to complete the short.

br

slick
autocargo
28th June, 2020, 09:08 AM
Yes, 12 volts and ground applied, I can't find one point on my pcb board, I circled the area on my two pics.
toto1828
30th June, 2020, 12:12 AM
726591
kia sportage 2018
autocargo
30th June, 2020, 06:32 AM
726591
kia sportage 2018

If you compare the circled area on my picture you see that is different... One shorting point should be there....
SOLOS
30th June, 2020, 06:55 AM
thas jtag but you cam used obd2 data
because i read in the auto work ok
autocargo
30th June, 2020, 07:25 AM
thas jtag but you cam used obd2 data
because i read in the auto work ok

I only have UPA UUSP and x-prog for this... So I'm looking for jtag. I don't have any tool that works by obd... What tool are you using for this?
slick_dick
7th July, 2020, 03:37 PM
find tms leg on mcu, use multimeter and probe the connections which u might think is tms. if it beeps u in luck!!


hope that helps

br

slick