View Full Version : Please more Power, DPF+EGR off
kotnascher
2nd March, 2019, 08:05 PM
600572
Hello, this is my original Backup from my Audi, Please more Power, DPF+EGR off. Thank yoy very mutch
TOINO
2nd March, 2019, 08:18 PM
please your ecu reference
kotnascher
2nd March, 2019, 08:32 PM
EDC16CP K-Line/CAN
ilkertdi
3rd March, 2019, 06:50 PM
Please more Power, DPF+EGR off. Thank yoy very mutch
Pass In Pm.
Best Regards.
Trust me, This is a Amazing file..
kotnascher
4th March, 2019, 08:37 AM
Incandescent lamp flashes, fault memory: Engine control unit software incompatible. At 2200 rpm, it regulates
ilkertdi
4th March, 2019, 11:07 AM
Incandescent lamp flashes, fault memory: Engine control unit software incompatible. At 2200 rpm, it regulates
What is the fault code?
P0602?
kotnascher
5th March, 2019, 09:55 AM
U0301 - 003 - Software inkompatibel, DTC probably also off
ilkertdi
5th March, 2019, 11:03 AM
Please test just this file
kotnascher
5th March, 2019, 04:16 PM
Pass is wrong :crushed:
sdtsedat
5th March, 2019, 07:19 PM
Write this.....
ecuworks
5th March, 2019, 07:58 PM
600572
Hello, this is my original Backup from my Audi, Please more Power, DPF+EGR off. Thank yoy very mutch
nice setup less consumption more power and more tork
kotnascher
5th March, 2019, 08:05 PM
@ ecuworks: Do not you get there, others have already tried, light bulb flashes on all mods. More power does not have to be, just decode DPF + EGR.
ecuworks
5th March, 2019, 08:13 PM
@ ecuworks: Do not you get there, others have already tried, light bulb flashes on all mods. More power does not have to be, just decode DPF + EGR.
no problem friend
also try me tuning i think there will be no problem
Ignasvw
5th March, 2019, 08:17 PM
Problem is not in solution
gsmik
5th March, 2019, 08:56 PM
U0301 - 003 - Software inkompatibel, DTC probably also off
Disconnect two temperature sensors and differential presure sensors.
This is solution for your problem
kotnascher
5th March, 2019, 09:06 PM
Car starts, light bulb is off, from 3000u / min, the light bulb goes on and flashes. error code: P0235: F1 Boost pressure control Control limit undershot Upper limit exceeded Lamp ON.
DPF is removed and a downpipe with temperature sensor and differential pressure pipes installed. Turbo hose was broken, so the bulb came, I changed, now all right.
Thanks to all
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.