Dreambox800 Clone I'm getting the error "ERR01 NO CA FOUND

[boltakal]

Nabilo BlackHole bootloader 75#
I have update softwarehttp://images.intellitxt.com/ast/adTypes/2_bing.gif (http://forums.afterdawn.com/t.cfm/f-59/images_for_a_clone_dreambox_800-799619/2#) option from the menu
Unfortunately something has gone wrong, now I'm getting the error "ERR01 NO CA FOUND" and its saying go to DM 7020 | dream-multimedia-tv.de (http://www.dm7020.com?)
How can I get it back?

Please any advice help plz ... cost me 280 doll

[Superman]

Hi Mate,
Use dreambox enofrcer and flash a clone image on it

[red devil]

have a look at this Digital Kaos - Downloads - 2nd stage and force flash (http://www.digital-kaos.co.uk/forums/downloads/other/8/2nd-stage-force-flash-997/)

[boltakal]

Plz can u guide me step by step..
im new her for dm...
Thanks

[Superman]

Hi mate,
Read the guide there its quite simple.

Super

[boltakal]

IM USING THIS CABEL
USB to RS232 Serial DB9 9 Pin Cable Adapter/Converter on eBay (end time 14-Dec-09 06:39:11 GMT) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300360016722) + 9 Pin Female Serial RS232 Gender Changer Adapter: Amazon.co.uk: Electronics & Photo

IM NOT SURE THIS CABEL IS RIGHT OR NOT
ALL DRIVE COME WITH CD, HAS BY INSTALL ON MY PC

I SEEN ANOTHER CABEL SHOULD BE RIGHT FOR ME ?
New USB to RS232 9 Pin Serial Cable - Female

New USB to RS232 9 Pin Serial Cable - Female ?3.99 on eBay (end time 31-Dec-09 16:47:31 GMT) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170353492151)

THANKS

[kevin64]

you need a null moden cable as well as th cable you allready have connect the 2 calbes togetheer this null moden cable will go in dreambox and in rs232 port then usb to laptop


Serial Null Modem Cable DB9F to DB9F RS232 1.5m on eBay (end time 12-Jan-10 18:56:52 GMT) (http://cgi.ebay.co.uk/Serial-Null-Modem-Cable-DB9F-to-DB9F-RS232-1-5m_W0QQitemZ180445140875QQcmdZViewItemQQptZUK_Comp uting_CablesConnectors_RL?hash=item2a035e578b)

[Superman]

It may be possible to do it with Crosssover cables if you have these?

[boltakal]

Im buy null moden cable from Ebay today ..USB to RS232 Serial DB9 9 Pin Cable Adapter/Converter i have allready

Let me try
I will come back give feedback.. if that work ..
Thanks

[Superman]

It should be okay, you bought the correct cable.

super

[firestorm]

i have problems in the past flashing with usb to rs232 adaptors so what i do know is i have a old pc in the atic with windows98 and a rs232(old printer port) on the back and it work every time

[Superman]

Some USB - RS232 have driver issues for some strange reason appear to work perfect but at times don't, its a strange thing in many aspects, being honest if you had a desktop Pc i would personally by a RS232 PCi Card.

Super

[DarkSoulDK]

what do you think about this DM800 Clone boxes are they any god or are they still to expensive ??

??

[Superman]

I think for ?215 you can't go wrong, but then again people are bound to say im baised, but truthfully i like them , they have there downsides but also there a lot cheaper than original so worth the cash.

super

[Kelly_DK]

Hi there

I got the same error as the most of the clone owners here.
I have used dreamup to flash Nabilosat Black Hole and that went well. When I power up again, I get the same error as before. Anyone who can help me guided through this problem is welcome.
I am not sure if I have to use dreamup with null modem to get the bootloader up. Then the box says it is in serial mode and has an IP in the display.
Do I then just use webinterface with that IP and upload the new bootloader?

Kelly_DK

[kevin64]

i agree i have had 500 cost me 150 pounds 5 years ago there were no clones about then so 215 and you get the latest hd tuner and better speck reciver even though it is a clone the origanal part for dm are made in japan and china so really you are getting the same box but at a cheaper price

[kevin64]

make sure you are useing a image that is for a clone box[ this one here has the boot loader already for you flash with dreamup it take about a hour with null moden cable click on the blue text :wink:QUOTE=Kelly_DK;374455]Hi there ***************************************** Digital Kaos - Downloads - Nabilosat Enigma2 Black Hole - DM800 v0.12 FOR CLO (http://www.digital-kaos.co.uk/forums/downloads/images/2/nabilosat-enigma2-black-hole-dm800-v0-12-clo-983/)


I got the same error as the most of the clone owners here.
I have used dreamup to flash Nabilosat Black Hole and that went well. When I power up again, I get the same error as before. Anyone who can help me guided through this problem is welcome.
I am not sure if I have to use dreamup with null modem to get the bootloader up. Then the box says it is in serial mode and has an IP in the display.
Do I then just use webinterface with that IP and upload the new bootloader?

Kelly_DK[/QUOTE]

[kevin64]

just thought of this if you have the new sim 2.1 then the old 2.0 clone image dont work think 2.1 sim is for bl 73/74/75 and the 2.0 only supports up to 72 bl you can not go load higher at the mintue on the old 2.0 maybe someone will bring out a fix soon
well if you have the 2.1 you will need the new clone image as the old ones dont work

[kevin64]

have a go at this only use this file if you have 2.1 sims if your dreambox came with 75 bl then this is for you this is not for 2.0 sims
:wink:

http://www.digital-kaos.co.uk/forums/downloads/other/8/clone-75-boot-loader-only-2-1-sims-1001/

[Kelly_DK]

Hi Kevin64

Thanks for speedy reply and easy guide. I am already flashing the first clone img. If that doesn't work, I wil try the other one.

Thanks,

Kelly_DK

[boltakal]

Thanks to All people 1000 Time
I Get flash new Image on my dreambox800

[hr_d]

I have the err01 Problem as i flash the newenigma2 2.8.2
now i look to fix the Problem

[gibgareth]

thanks will test as ive bricked my box lol

[daymond]

i cant download those files

[mickebbs]

Thanks for the info guys, got a dreambox but didnt realise it was a clone until i tried flashing. Hopefully this will help me recover the expensive situation. Fingers crossed.

mikc

[ole_irgens]

Nabilo BlackHole bootloader 75#
I have update softwarehttp://images.intellitxt.com/ast/adTypes/2_bing.gif (http://forums.afterdawn.com/t.cfm/f-59/images_for_a_clone_dreambox_800-799619/2#) option from the menu
Unfortunately something has gone wrong, now I'm getting the error "ERR01 NO CA FOUND" and its saying go to DM 7020 | dream-multimedia-tv.de (http://www.dm7020.com?)
How can I get it back?

Please any advice help plz ... cost me 280 doll

Same problem here mate, will try to DL some of the files below to see what happens.

[iKay]

I just had the same problem couple of hours ago. I had Gemini 460 on my clone DM800. I thought to test Black Hole 1.24. Once I got it flashed, i received the No CA error. After some researching, I managed to get my box working with Gemini 470. Just do the following:

1- Download Gemini 470 BL75 from Access point (http://www.filecrop.com/32825690/index.html)

2- Connect your box through cable.

3- Run DreamUp, choose COM1 and Enable network and configure the IP addresses. (to install the image in two minutes. Otherwise just use COM1 without network, but it will take around 61 minutes to flash the box)

4- Click Connect and power on your box.

5- Once the DreamUp is ready, open the browser and type the IP address of the box

6- Click "upgrade firmware" and browse to the downloaded Gemini 470 NFI image and click flash

This should be done in couple of minutes, then just disconnect your DreamUp and reboot your box

Lesson learnt: I can't get lucky everytime lol

[sdbakari]

after flashig dream800 CA no found

[sdbakari]

I nned flshing image
Dream DM800
released 0500
kernel: Linux 2.6.18-7.3-dm800
image 04-29-2010
Enigmal experimental
clone one

[reda]

ok and thanks

[highdefdreamer]

i too have the same problem, i only got this box yest and have been scouring the net trying to find out hot to get scrambled channels. any advice would be greatly appreciated as i dont know what im doing! just following youtube and forums. please help

[yassinov]

i too have the same problem, i only got this box yest and have been scouring the net trying to find out hot to get scrambled channels. any advice would be greatly appreciated as i dont know what im doing! just following youtube and forums. please help

Try With OptiFlasher latest version & report here :
http://www.digital-kaos.co.uk/forums/f39/dreambox-optiflasher-v1-0-3-enigma2-edition-225750/

[GixerJas]

I think I've got the same problem as many of the other posters. I can connect using a modem cable with DreamUp, upload the flash, which takes an hour followed by the DM800 internally loading the flash but when I reboot the CA not found error hasn't changed. Can I just flash the boot loader via the serial cable and then use the network connection to upload the full image? and would this be any quicker?

I'm guessing that I've tried using an incompatible image but waiting an hour to find out that I haven't fixed the problem is a pain after several attempts

[alom5]

just flash a known working image from the downloads section. will have bootloader on it. so just a matter of flash and go :)

one other thing sometimes it's best to close everything and then restart the box

[damiensk]

same here, i can use dream up, and get it to http mode,
so i have an ip address on the dm 800 lcd, have tried diffrent images, either by ie or via the cable. they both say flash complete, but when i pull the power and power on, i get the same message, err01 no ca found. have tried images with bl69,75 and 76. i have a sim2.1
starting to do my head in, has the box had it?
or has someone got a fix?

i dont need the 2nd stage fix, as the flash button is not greyed.

[alom5]

same here, i can use dream up, and get it to http mode,
so i have an ip address on the dm 800 lcd, have tried diffrent images, either by ie or via the cable. they both say flash complete, but when i pull the power and power on, i get the same message, err01 no ca found. have tried images with bl69,75 and 76. i have a sim2.1
starting to do my head in, has the box had it?
or has someone got a fix?

i dont need the 2nd stage fix, as the flash button is not greyed.

you need to put the image for the correct sim. so your image must be for sim 2.1 and not 2.01.

once flash complete....like i said close browser...disconnect all wires and turn on and off. will work.

[damiensk]

i have a sim 2.01, and had been using images up to bl 75 ok,
until a few days ago, when a err01 no ca found came up.
now the only image that i can flash on the box is an old bl69 image.
have tried other images, ( 6 or 7, including the one i was using which was the phoenix 133) and also tried flashing 2nd stage nfi files for bl72 and 75 images.
but the only image that i can put on is the nabiloblackhole bl69.
can someone tell me a fix, or has the image i was using timebombed my 800 clone

[Sideboss]

Want to say thanx for the help ppl are lending in trying to sort out different difficulties - been quite helpful for me anyways! :top:

[shaft1992]

I have the same error after making a software update on my DM800HD SE Clone by mistake. I have now downloaded dreamup, but I am looking for gemini image for a clone to download and cannot find this. Any tips where I can find this?
I am a complete novice and will try to fix the problem with all the info from the threads, but i am not so optomistic.

[johnsonjohn]

Hi all,
I've got a same problem - after install SSL 84b thru web-interface on my DM 800 HD PVR I only see message "Sim201 team #84b www.dm800sim2.com (http://www.dm800sim2.com) -> error! *ERR01: NO CA FOUND" on lcd. I've tried Universal Dreamup 1.3.3.4 & 1.3.3.8, OptiFlasher-Pro-E2 and Dreambox NO CA FOUND Repair Tool, but nothing helped. Can anyone advice me what to try else. Thanks!

[billybob69]

Hi all,
I've got a same problem - after install SSL 84b thru web-interface on my DM 800 HD PVR I only see message "Sim201 team #84b www.dm800sim2.com (http://www.dm800sim2.com) -> error! *ERR01: NO CA FOUND" on lcd. I've tried Universal Dreamup 1.3.3.4 & 1.3.3.8, OptiFlasher-Pro-E2 and Dreambox NO CA FOUND Repair Tool, but nothing helped. Can anyone advice me what to try else. Thanks!

Hi,

Have a look at this thread. I used this to fix mine when it had the same error message -
DM800 Fix: No CA Error (http://www.digital-kaos.co.uk/forums/f34/fix-no-ca-error-70341)

I think that the majority of mistakes comes from flashing the wrong image i.e. an image with a different version bootloader OR a SE image to a HD box (and vice versa)

You have to use a patched version of DreamUp to reflash a 'CA error', it doesn't sound like you are using that?

The bottom post on this link is what I did to fix mine -
http://www.digital-kaos.co.uk/forums/f205/does-anyone-offer-reflashing-service-dreamboxs-237756/index2.html

bb69

[cabrca]

Hi,

I'm ahving the same problem....

Going to test ?

Thanks for the clues

[difficult]

does any one know where to buy service cable which I can connect to my laptop please?

[southpaw]

does any one know where to buy service cable which I can connect to my laptop please? if you read this thread from page1, you will see that people used ebay for the cable