How can I get my sky uk card to work on DM500s??

[bluearmy]

I just cant get it working....

any help?

[firestorm]

try cccam2.90

[bluearmy]

using cccam 2.0.9
cant find a newer version


are there any settings I need to change?

[firestorm]

If you try the new darkstar image there is the facilty to put your card details in

[bluearmy]

changing image isnt really an option.

i think I will lose all my motor settings etc.

I have no idea how to fix anything if it goes wrong

[^^MaXiMo II^^]

You can do a back up of your settings with DREAMEDIT and back up any of your files with a simple ftp tool
If you need more have a play around with flashwizard wih this tool you got the option to do a complete back up of your current image.
I dunno what image you are using at moment but take firestorm advice :)

[C64]

Have you told the CAM to read from the card slot?

[bluearmy]

Is there a way in the new image to stop the motor going any further west than 10 degrees?

Thats when it gets too close to my roof.

I have nabilo image I am told

<--bluearmy added 4 Minutes and 53 Seconds later...-->


Have you told the CAM to read from the card slot?

Err..not sure. What is the option?
Pressing the blue button and changing from default?

[firestorm]

try putting Cccam plugins on your box make sure its reading the card then leave it on sky 3 till it clears.Has the card been ativated?

[bluearmy]

Yes card has been activated , been using in sky+ box for years and then sky hd box.

How do I put cccam plugins in?

[firestorm]

press the yellow button twice then download pluggings ps you have to have the box connected to the internet

[bluearmy]

connection to the server refused.

I am connected to the internet. Cant do a key update either. Could do earlier.
Maybe server is offline?

[firestorm]

i would check for you but i am at work,but if its worked before and you have not changed anthing you must be down,just check the ethernet plug is in and you can see a green light inside the box flickering also to check its not your box put the ip address of your dreambox into the address bar of your pc the password and login are root and dreambox

[bluearmy]

yes it connects fine

<--bluearmy added 5 Minutes and 46 Seconds later...-->

ok, rebooted and now it connects to downloads.
What plugin am I looking for?

Also, it wont mess with my settings will it?

[firestorm]

Cccam plugins and it wont mess your setting up

[bluearmy]

Sorry, but I dont see Cccam plugins :(
I see Cccam info thats all

[firestorm]

can you see a cccam config file?if you delete 2.09 and go back to 2.0.7 i know this one works fine with a sky card

[bluearmy]

in image cams or image plugins?

[firestorm]

i am not sure as i am at work so i cant check up and its a long time since i had a 500s basicly you need a plugin wich allow you to see if the card is being read,try this link and install ::::>>Nabilosat Forum<<:::: (http://www.nabilosat.info/forum/showthread.php?t=51851&highlight=sky+card+500s)

<--firestorm added 2 Minutes and 33 Seconds later...-->

you will need dcc and transfer it to var\bin var\bin var\ect and var\uninstal this should put the right config file in to see the card

[bluearmy]

I appreciate the help, but registration is disabled on there, I tried earlier.
Maybe I wait til you get home and have some time..

[firestorm]

no problem we will sort it but i wont be home till 6am i have sent you a pm just a quick thought you have got the card in the right way up

[bluearmy]

Yes, card is in the right way.

[hutchy]

I appreciate the help, but registration is disabled on there, I tried earlier.
Maybe I wait til you get home and have some time..

hi m8
all you haver to do is flash the box with say gemini 4.2 as the newer ones may have the clone , then install any cccam version from 2.0.4 to 2.0.9 and put this in it

SMARTCARD CLOCK FREQUENCY: /dev/sci0 5300000

put that under all your f and c lines and that should be it up and running. if u need help i can help u out pm me