carprog ori cluster scirocco 2013

[toreddu]

Hi, I would like to buy carprog base to clone and replace my cluster and to have immo data, pin code , cs, vin, mac. Can I do it with base version and sw 7.25? The car is a vw scirocco 2013, it should mount nec processor with eeprom 24c64. Thank you , best regards

[toreddu]

I ciao, devo leggere l'immo di dati, cs, mac dal mio gruppo di ciao, dovrei leggere i dati immo, cs, mac dal mio cluster per cambiarlo, posso farlo con Hi, I would like to buy carprog base to clone and replace my cluster and to have immo data, pin code , cs, vin, mac. Can I do it with base version and sw 7.25? The car is a vw scirocco 2013, it should mount nec processor with eeprom 24c64. Thank you , best regards





di carprog ??? devo comprare quello originale ??? grazie

[TOINO]

I think carprog only makes from 2014 mqb

[toreddu]

[QUOTE = TOINO; 3518541] Penso che carprog faccia solo da 2014 mqb [/ QUOTE]

i have a carprog clone 8.21 sq.m. not read the immo data from obd, and i was thinking about buying the original version




Ho un clone di carprog 8.21 ma non leggo i dati di immo da obd, quindi stavo pensando di acquistare la versione originale
Ho un clone di carprog 8.21 ma non leggo il immo data from obd, quindi stavo pensando di acquistare la versione originale

[BraLaas]

I have done this by just changing the back board of the cluster where the MCU and EEPROM is, but depends what is wrong with old cluster,
my gauge was bad

[exe123]

original carprog will work on NEC clusters after 2012/2013 SW 07xx and later
You will need S7.55

[toreddu]

my cluster and sw 0809 and hw 04, I tried from obd cn original carprog and sw 7 25 but it does not work, it tells me enter boot mode. I try with sw 7.57 of carprog ???

[exe123]

Original only! Clone S7.55 is authorisation not SW version.

[toreddu]

so which one should I use ??? 7.57 original?

[exe123]

You need to buy original carprog interface from codecard.eu !
330€ + 220€ for S7.55 authorisation.
Clone will NOT work!

[toreddu]

I already have the original carprog, I tried cn sw 7.25. ok I try with 7.57

[exe123]

You don't have original. Original version is 11.35 You are trying with chinese copy. It will never work

[toreddu]

yes I have the original version and the clone version 8.21

[toreddu]

I read with sw7.25 from obd. thank you all