SDI6 (porsche ) and KTAG ?

[peko]

hi friends

i am testing read SDI6 from porsche with k-tag official from alientech

error communication, know recognise ECU https://www.automotivediagsolutions.com/images/smilies/qwq1.gif

support alientech say me connect alim 14,4 V 10A to ktag

i connect alim 16v 50A and always no communication error with ECU
link to my alimentation : ALIMENTATION MAAS SPS -50 II
https://radio-media-system.com/ALIMENTAT...-SPS-50-II (https://radio-media-system.com/ALIMENTATION-MAAS-SPS-50-II)

anybody have good solution to read this ECU ?

thank you ;)

[voltechcar]

what k-tag?

[teerak2uk]

what k-tag?Original. .

[peko]

Original. .

yes K-tag original from alientech with annual suscription ok

not ktag EU or china clone

[sdtsedat]

I had same problem, i put new needle (good correct boot pin) and it will read..
i use 1A 12V

[peko]

I had same problem, i put new needle (good correct boot pin) and it will read..
i use 1A 12V

sorry i not understand " new needle " , what you mean ?
thanks for your help

[teerak2uk]

sorry i not understand " new needle " , what you mean ?
thanks for your helpHe means make better connection on boot pins

[peko]

He means make better connection on boot pins

i use wire 10cm length
i soldered it to PCB

maybe to length cable ?

[teerak2uk]

i use wire 10cm length
i soldered it to PCB

maybe to length cable ?Length should be fine most common problems are connections

[peko]

Length should be fine most common problems are connections

connection is soldered CNF1 and Boot cable so connection must be ok

support alientech say me trouble is alimentation ktag
but i connect it to alimentation 16v 50A ( able to 50A )

is very strange ...

[sdtsedat]

50A???????

Your ecu will be fire...

[peko]

50A???????

Your ecu will be fire...

lol alim can send to 50A but i apply 16V in ktag

ktag work with 12V to 24V
ktag convert power to ECU

support say me apply 14,4V and 10A , so my alim is ok but nothing read

[gad3n]

front connectors 3 chinese amp max .. and this is not good power supply at all ... put oscilloscope and you will see :)

[hcwc]

Are you sure it is sdi6 not sdi6.1 ?

Had one panamera with sdi 6.1, autotuner fail, ktag fail, cmd fail, kess only id so i gave up on that one

[bersch8688]

My Ktag Rework -> Work Perfect Porsche SDI6 ��

[peko]

front connectors 3 chinese amp max .. and this is not good power supply at all ... put oscilloscope and you will see :)

not use this
use conectore behind

[peko]

Are you sure it is sdi6 not sdi6.1 ?

Had one panamera with sdi 6.1, autotuner fail, ktag fail, cmd fail, kess only id so i gave up on that one

yes 6.1
is same as 6

[hcwc]

Any news ? ;)

[peko]

Solved 😜
wires have trouble
i replace it and all solved
support from alien is not good ,Dora king about alim lol

[speed2134m]

I'm having the same problem with a Panamera SDI6.1 ECU.
I can get ID by a few flashers but none of them can unlock or read it.
May you please tell me what you finally did?

[peko]

not forget to join 2 pin on PCB and after all is ok to R/W

[TomSd]

Have you solved that problem