View Full Version : Vectra C Z19DTH Swirl Flaps Remove
sroka
6th March, 2019, 10:32 AM
Hello!
Hardware manufacturer number: 0281014450
Software Number: 1037502505P485
Could you help me removing this 2 DTCs:
P2075 - Swirl Level Sensor Circuit Open or High Voltage
(05) - Present
P0660 - Swirl Level Control Solenoid Valve Circuit Open
(04) - Present
read kess v2
regards!
bobor15
6th March, 2019, 11:08 AM
jest dtc swirl off
sroka
6th March, 2019, 12:12 PM
bebor is stiil the same foult codes :(
stanislav georgiev
6th March, 2019, 01:10 PM
Try again with my decision
sroka
12th March, 2019, 10:52 AM
stanislav work perfect big thx
badisan
3rd May, 2019, 04:33 PM
Hello,
I tried to remove FLAPS OFF with a swiftec program but without success.Please help.
Vectra c Z19DTH Swiril Flaps Remove P1110 P2075 P0660 P1109
Bosch Hardware Number: 1037A50284
Bosch Software Number: 0281012534
Opel Software Number: 5519715
Best regards
moky
15th November, 2019, 07:44 PM
Hi all
someone can Swirl Flaps Remove this opel Z19 DTH please?
I have dtc P2075-61/62 and 63 to remove
many thanks !
Anonimius
15th November, 2019, 07:58 PM
Need need need please ....LOL
moky
15th November, 2019, 08:03 PM
Need need need please ....LOL
?? good intervention my friend thanks....
mancioks
15th November, 2019, 08:24 PM
Hi all
someone can Swirl Flaps Remove this opel Z19 DTH please?
I have dtc P2075-61/62 and 63 to remove
many thanks !
but this file is not original, i see that somebody already try to delete swirl here
moky
15th November, 2019, 08:32 PM
but this file is not original, i see that somebody already try to delete swirl here
sorry but it's file I read..will search original file on base thanks
moky
15th November, 2019, 08:39 PM
just found original file on my base and file is 100% original mancioks..
stanislav georgiev
16th November, 2019, 07:49 AM
Read full bdm to remove the flaps
stanislav georgiev
16th November, 2019, 08:46 AM
Here is my decision, but it should be written BDM
mzabka
21st January, 2021, 12:24 AM
HI,
can you please help me with swirl flaps off ?
DTCs P2075 and P0660
Vectra C Z19DTH
0281014450 1037390674 HNOMS240
Thanks a lot
chrisimerk
21st January, 2021, 01:58 AM
HI,
can you please help me with swirl flaps off ?
DTCs P2075 and P0660
Vectra C Z19DTH
0281014450 1037390674 HNOMS240
Thanks a lot
Here flaps off you may unplug or leave flap motor
no pass just write
pawl
16th March, 2021, 11:57 AM
Could you help me removing this
dtc p2075-0F P2075-63
hardwarde nr1037A50317
softwarde nr 0281012868
softwarde 5520179
z19DTH
peechie
16th March, 2021, 12:05 PM
Could you help me removing this
dtc p2075-0F P2075-63
hardwarde nr1037A50317
softwarde nr 0281012868
softwarde 5520179
z19DTH
Try this.........
pawl
16th March, 2021, 12:53 PM
thank peechie you it works great
pawl
16th March, 2021, 03:24 PM
hello after removing the dtc p2075-0f, p2075-63 i now have u2103, p2075-05, p0660-04 any advice?
pawl
16th March, 2021, 09:34 PM
this solution does not work with a disconnected flap controller does someone work without a controller?
hardwarde nr1037A50317
softwarde nr 0281012868
softwarde 5520179
z19DTH
chrisimerk
16th March, 2021, 10:10 PM
this solution does not work with a disconnected flap controller does someone work without a controller?
hardwarde nr1037A50317
softwarde nr 0281012868
softwarde 5520179
z19DTH
here worked solution you can disconnect motor
pass in pm
CLEAR YOUR PM CANT SEND PASS
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.