Sbb key programmer

[huzzen27]

Hi group members,
One of my freind bought sbb key machine (clone from china),it was working very good until yesterday suddenly it is asking for the password,until know it was not asking for password,so what could be the problem for it,and please suggest any solution,waiting for your reply,thanking you,regards-Huzefa.

[Ashraf6119]

Hi huzzen27

If its from China than the Pass Word must be at the back of the Tool have a look or try 000000.

Good Luck

Ash

[Master01]

Hi group members,
One of my freind bought sbb key machine (clone from china),it was working very good until yesterday suddenly it is asking for the password,until know it was not asking for password,so what could be the problem for it,and please suggest any solution,waiting for your reply,thanking you,regards-Huzefa.


đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

[sropqras]

What is a programmer

[huzzen27]

How about try 38023118
this is the password get from sinoy
i bought one from this company ,and this password work
below is for reference
Silca SBB Key Programmer im*oBILISER V2009 updatable - Auto Key Programmer - BMW GT1,BMW OPS,BENZ STAR,MB STAR,AUTO BOSS V30,TACHO PRO,FORD VCM,X431,VAG COM (http://www.sinoyeobd.com/wholesale/Silca-SBB-Key-Programmer-im*oBILISER-V2009-updatable-281.html)
hope this will help you
Hi, I will try tommorrow and inform you,thanks-regards,Huzefa.

[adil_007]

Hi Huzen,
I had occurred with same problem but i got it done.By the way what is the serial number of the product and which company did u bought. Coz many clone machine have this serial number :-1107201721407. If it is same i have the password. Let me know i will give you.

[huzzen27]

Hi Huzen,
I had occurred with same problem but i got it done.By the way what is the serial number of the product and which company did u bought. Coz many clone machine have this serial number :-1107201721407. If it is same i have the password. Let me know i will give you.
Have sent for the replacement,thanks for your replies and support,regards-huzefa

[cdztech]

Hi folks. Curiously, I have the same problem. The SBB just started to ask for a pwd and there is none at the back for the to try. Neither 000000 nor 38023118 worked. The serial number is 1100221131029. Can anyone help?

[djtomcat]

Just reprogram your unit with other S/N and use proper pwd.

[adil_007]

Just reprogram your unit with other S/N and use proper pwd.
HI,
How one can do reprogramming of sbb can u please let me know how it is done does it have any kind of software ........

[cdztech]

djtomcat, How can I re-program it without even having access to it? The thing is, I no longer succeed to connect it to the PC though RS232. The connection keeps on failing. So, I guessed it is due to the pwd problem.

[shitad]

Does any one have the latest SBB update for clones.
I have attached the latest update info.

[phoenix22]

i have bran new one here i will see it works but very hard to use it im not up to date with this kind of machine thanks tel 07738643655 :cobblers:

[phoenix22]

wanted lead for t300 key programer dl16 i have obd2 no good for dl 16 sockets can and peugot t300 manule and chip thanks :ciao:

[gilly12]

hi . this furum is most helpfull.first i must say , thank u guys. one probelm i have , i have this SBB that is asking for the password after using it for a while.s/n1107201721407.
its a chineese clone .thanks

[uobd2010]

Hi group members,
One of my freind bought sbb key machine (clone from china),it was working very good until yesterday suddenly it is asking for the password,until know it was not asking for password,so what could be the problem for it,and please suggest any solution,waiting for your reply,thanking you,regards-Huzefa.

hi ,just go to your seller for password.

[steveandstephany]

i ma looking for the update for an sbb i am on ver27 can anybody help me

[Eamonahmed]

Sbb Software

ORGINAL SOFT-SBB.rar (http://www.megafileupload.com/en/file/255123/ORGINAL-SOFT-SBB-rar.html)

[Ephrem]

I have SBB key programmer (China made). How do I reset or register a key if I lost all keys, especially, on Toyota vehicles.

Thank you

[JIMMYQ]

i have one too im new to key programming but i find the sbb self explanotory? its pretty simple to use

[Automat]

The instruction disk says you can reset the immo on toyota and load kew keys, but all the others in the system will be erased. (V31 for 2010). Can anyone verify this? I have not tried it yet. Thanks for any input.....

[vcc]

El Archivo mandarme PUEDES v31 p?rr probarlo bien Por Correo o tu Quieras Por d?nde son los cantantes

[alex1986]

Hello, pls try "38023118"

[alex1986]

Hello, pls try "38023118"

[alex1986]

Hello, pls try "38023118"

[vcc]

tienes el v31

[THeFOg]

The instruction disk says you can reset the immo on toyota and load kew keys, but all the others in the system will be erased. (V31 for 2010). Can anyone verify this? I have not tried it yet. Thanks for any input.....

Yes it is right you can do it even with v28/27 the older one

[marekajs]

Hi group members,
One of my freind bought sbb key machine (clone from china),it was working very good until yesterday suddenly it is asking for the password,until know it was not asking for password,so what could be the problem for it,and please suggest any solution,waiting for your reply,thanking you,regards-Huzefa.


Try 38023118 or 00000000

[jimmy mohan]

Hi Huzen,
I had occurred with same problem but i got it done.By the way what is the serial number of the product and which company did u bought. Coz many clone machine have this serial number :-1107201721407. If it is same i have the password. Let me know i will give you.
HI IV GOT THE SBB ASWEL AND IV GOT DAT SERIAL NUMBER BUT I DONT HAVE THE PASSWORD.COULD YOU HELP??THANKS

[helshani]

can someone help me to download sbb v33

[sinoy03]

Now the SBB has the newest version v33 ,2010 ,which add some new cars of 2010,very useful

[dyc]

where can i find v33 update?

[Cozz]

where can i find v33 update?

Try this...

http://www.digital-kaos.co.uk/forums/f177/updating-duplicate-sbb-fault-169793/

Also do some searches around the forum. I'm sure you'll find what you are looking for.

[dyc]

thanks for your brilliant advice about searching but there is no working files for v33

[Automat]

thanks for your brilliant advice about searching but there is no working files for v33

Maybe just get another one, they are cheap enough....

Wholesale GUARANTEED 100% 2010 SBB Key programmer V33 free shipping (http://www.aliexpress.com/product-gs/381831282-GUARANTEED-100-2010-SBB-Key-programmer-V33-free-shipping-wholesalers.html)

[chris1955]

Hi All I am looking for advice on buying a SBB ver.32 I am thinking to purchase from OBDfactory.com has anyone hads dealings with this company.

Regards
Chris

[super jumbe]

OBDfactory.com 100% trustworthy, I have been buying tools for the last 3 years no problem, email, Candy Lee friendly advice.

:dancing2:

[gilly12]

hi can any one tell if the SBB clone can program the key on the ford galaxy .is there any other clone that can do it, i try the T300 the mpv and still wont do , it go as far as ,replaceing the second key and then it stay forever.what am i doin wrong

[albertros]

"hi can any one tell if the SBB clone can program the key on the ford galaxy"

Need a year etc. on that one

[gilly12]

98 to 2000 year

[albertros]

Hi,
this is probably help full

http://dl.dropbox.com/u/4682342/VAG-GROUP.pdf

http://dl.dropbox.com/u/4682342/FORD-EUROPA.pdf

[8k65m]

OBDfactory.com 100% trustworthy, I have been buying tools for the last 3 years no problem, email, Candy Lee friendly advice.

:dancing2:

I have yesterday paid him lot, and today see http://www.obdfactory.com/ (Access error! You want to access the website does not exist or has been closed.) What your opinion?

[albertros]

Hi,
I wouldn't worry too much, I have delt with them for over 3 years.

[8k65m]

Hi,
such situation already was previously?
Thanks

[Atex31]

I have also bought products in the past from OBD Factory Auto Electrics Co.,Ltd - OBDFactory Autel MaxiDas DS708 EU702 Diagun Autoboss V30 Heavy Duty Launch X431 (http://www.obdfactory.com) without any problems.

Regards

Atex31

[8k65m]

All OK! obdfactory possible to entrust.
Regards