View Full Version : NEED HELP FOR CONNECT THE LCD REPORT FOR CAR AUDIO OPEL
geniehex
13th December, 2009, 03:55 PM
HELLO
i have a car audio CDR500 for car astra opel
i would the connectic betwen car audio and lcd report for start it !
i post the picture
thank in advance
Jose19
13th December, 2009, 04:53 PM
HELLO
i have a car audio CDR500 for car astra opel
i would the connectic betwen car audio and lcd report for start it !
i post the picture
thank in advance
Hi
Check your PM
Jose
Fradebo
13th December, 2009, 05:54 PM
Hi,
Some questions ....
What cdr500 is it ... a Delco or a VDO ?
In what car should it go;
If its in another Opel you can change the display configuration with startup+buttons 4+6 or 3+5.
Keep pushing and check your display for digit8-digit10.
If it?s right release.
If it?s for another car ... forget it !
greetz Fradebo :ciao:
PremierD
13th December, 2009, 06:04 PM
Hi,
Some questions ....
What cdr500 is it ... a Delco or a VDO ?
In what car should it go;
If its in another Opel you can change the display configuration with startup+buttons 4+6 or 3+5.
Keep pushing and check your display for digit8-digit10.
If it?s right release.
If it?s for another car ... forget it !
greetz Fradebo :ciao:
Correct mate .... Except If you check the pickie ..the poster wants to connect up the Radio to a Display .....Pressumably to test it on the bench ...:dontknow:
Meat-Head
13th December, 2009, 06:08 PM
i would be inclined to go with a chainsaw to a scrap yard, and carefully rip the shit ouuta another car, and take that radio and that display for good meausre.
If you try to mix and match and old/new type plug you will get 'code' you enter the code, it then work and you will end up with just the code on the display, no station name.
Jose19
13th December, 2009, 08:40 PM
i would be inclined to go with a chainsaw to a scrap yard, and carefully rip the shit ouuta another car, and take that radio and that display for good meausre.
If you try to mix and match and old/new type plug you will get 'code' you enter the code, it then work and you will end up with just the code on the display, no station name.
Hi
He already have is answer.
Jose
geniehex
13th December, 2009, 09:37 PM
hello
i would this connection because i remove the mcu TMS for find the code via NYO4, i find it , and i would test if it is working!! i don't have a car!!!
thank in advance
stogramus
28th April, 2010, 09:56 AM
thx for info!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.