Noobs guide to patching your Technomate

[.: JaCkPoT :.]

Guide for the newbies.

Heres how to load the patches.


Download the relevant patch and extract.
Download the relevant loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

Download the correct patch for your receiver.
Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick. Insert your usb memory stick in the usb port under the front flap.
Turn the receiver on ready to load the patch then press the usb button on your remote.
on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk and Benny/9

[tee23uk]

Guide for the newbies.

Heres how to load the patches.


Download the relevent patch and extract.
Download the relevent loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk hi i have the technomate 6900 but all still scrambled im using s/w version 6.53p june 27th on cass menu can you advise me if ive got something wrong thank you

[titian40]

Thanks for help. The AU delay has fooled me before!

[.: JaCkPoT :.]

Thanks for help. The AU delay has fooled me before!

lol i take it your sorted now.

[dundeejim]

can i use a usb flash pen instead m8?

[.: JaCkPoT :.]

If you got usb receiver then ofcourse.

[dundeejim]

the patch wont go on the pen

[.: JaCkPoT :.]

You have to extract the file first, the box cant unzip or extract. Try that.

[dabba]

what is the difference between patching and softcam ?

there appears to be new for both almost daily, do they need patching daily ?

thanks

[.: JaCkPoT :.]

A patch is firmware/software to help your receiver work which has keys already in it but when they expire they need to be updated to thats what the softcam does.

[dundeejim]

yes when i try to extract say something about cant do it

[dabba]

what is the difference between patching and softcam ?

there appears to be new for both almost daily, do they need patching daily ?

thanks

and do the soft cams AU?

how often on average do they req updaing ?

[.: JaCkPoT :.]

Keys au very regularly on some channels and on others after a period of time.

[dadadere57]

I ve just joined this website. I have no experience of satelitte receiver . How can I download technomate loader for my 6900 Combo?

Dadadere57

[dundeejim]

go to the technomate download select ur box and download patch

[.: JaCkPoT :.]

You dont need a loader. Use usb stick. Your receiver uses the 1000series loader.

[falzarhino]

sorry i'm new to doing patches i have opened and extracted the loader for the technomare 1500ci(same loader as 5400ci)and have downloaded the latest patch but when i try to extract it i get the Compressed (zipped)Folder is invalid or corupted so i cannot extract it where am i going wrong?

[.: JaCkPoT :.]

Theres a winrar patch download that and use it or atleast try to.

[ruleigh08]

hi newbie on here

can any tell me where i can get patch for TM5400 ci

[.: JaCkPoT :.]

hi newbie on here

can any tell me where i can get patch for TM5400 ci
stick to one thread in the future mate, it becomes confusing.
i have replied to ur other post.

[Holmes]

I have tried this but can't extract file it says its currupt.
Rob.:hello:

[dundeejim]

says it with me to m8

[benny/9]

I have tried this but can't extract file it says its currupt.
Rob.:hello:
************************************************** *******
are you useing the internet explorer ?
i have read a few posts about corrupt files
when downloaded with this, if you are try
firefox as your browser,

[dundeejim]

yes im using explorer i have tried winrar winzip files dont work from here with me any way

[.: JaCkPoT :.]

as mentioned try ff

[dundeejim]

will do m8

[ebunmiebun]

can any one help me with TM6800Hd loader please?

[benny/9]

can any one help me with TM6800Hd loader please?
************************************************** *******
you dont need to double post mate, i have given you the info
in your other post take a lok there and if you need more help
ask there

[.: JaCkPoT :.]

Post 1 edited. Thanks to benny/9. I have edited the post he made slightly so it is easier to read.

[UzAkLArDaN]

Is there any video tutorial how to patch tm-6900?

[benny/9]

Is there any video tutorial how to patch tm-6900?
************************************************** *******
i hav'nt seen any video's mate but it's very easy to patch
a tm 6900 either with a null modem cable or a memory stick
all the info is in this thread on how to patch

[bill4676]

AM LOST WHAT TO USE ON MY TM 3100D IHAVE READ STICKIES BUT DONT MENTION THIS BOX
I DONT NO WHAT TO PUT ON IT SOFTWARE/FIRWARE

[benny/9]

AM LOST WHAT TO USE ON MY TM 3100D IHAVE READ STICKIES BUT DONT MENTION THIS BOX
I DONT NO WHAT TO PUT ON IT SOFTWARE/FIRWARE
************************************************** *
loading software, patches and keys is much the same for all tm models with a null modem cable but the tm 3000 series receivers require there own tm3000 loader panel you dont use the darkman v187 loader

[craignorton2009]

what channels can you get off of these technomate systems

[.: JaCkPoT :.]

Depends on you equipment....the patch by itself..digitv, orf, rai, viasat(certain channels), nag2 at 23.5, kingston arqiva....with a diablo cam you will get all the above plus canal1west, 9e, kabel kiosk8w, digitalb...

[davey ply]

just used your noobs guide frist time everdone this seems to have worked thanks for your info

[harlequin]

newbie a bit slow here
May be I am missing something but only get an error saying
"Not compatable with your stb"
No matter what file I try.....

Have a TM 6900 Combo Super

[benny/9]

newbie a bit slow here
May be I am missing something but only get an error saying
"Not compatable with your stb"
No matter what file I try.....

Have a TM 6900 Combo Super
************************
this is the patch you need. look for the patch dated 18/12/08
http://www.digital-kaos.co.uk/forums/f75/technomate-tm6000-super-series-patch-10673/ and this is how to load the patch
FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
******************************
from the forum first download the correct patch for your receiver,and then open the zipped folder and remove the patch file ready to transfer the patch onto your usb memory stick. next insert your usb memory stick
in the usb port under the front flap and then turn the receiver on ready to load the patch.then press the usb button on your remote. on the next screen go to data transfer and click>ok now you will see a panel with the patch on it, it will highlight, [for patching] press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
********************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting the item you want to load.
*******************************

[.: JaCkPoT :.]

can someone pm me the latest digitv keys please!!!!!!!!!!!!

[harlequin]

Cheers benny/9.....but still the same....:stupido3:
with in a second same error!

[benny/9]

Cheers benny/9.....but still the same....:stupido3:
with in a second same error!
*******************************************
which way are you loading the patch?
memory stick or null modem cable and what exactly happens and what
message are you getting and has the receiver been patched before,

[harlequin]

Am using a USB, just got the box, so never patched.
When I highlight the file 6900HD_667p_181208.stp and press OK
says do not power off etc, reading, Then changes to writing and not compatible
When go to system info current SW version is 6.68 Dec 18 2008…..


Cheers

[Bulld0g]

Make sure your loading the correct patch for your box.Double check the model number the patch is for m8

[alscottydog]

Guide for the newbies.

Heres how to load the patches.


Download the relevant patch and extract.
Download the relevant loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

Download the correct patch for your receiver.
Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick. Insert your usb memory stick in the usb port under the front flap.
Turn the receiver on ready to load the patch then press the usb button on your remote.
on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk and Benny/9

Thanks for you message, am new to this site so not sure how it all works or even if im messaging correctly ? Can you tell me how i can download a driver for my rs232 usb serial convertor, where do i go on this site0. Thanks

[benny/9]

Am using a USB, just got the box, so never patched.
When I highlight the file 6900HD_667p_181208.stp and press OK
says do not power off etc, reading, Then changes to writing and not compatible
When go to system info current SW version is 6.68 Dec 18 2008?..


Cheers
************************************************** ******
hi m8,
do you have a null modem cable ?
i have read that all technomate usb models are best
patch for the first time with a cable.
i know this might seem a daft question you say you have the 6900 super
does it have a ethernet port and a usb on the back?
and which usb port are you useing?

[harlequin]

************************************************** ******
hi m8,
do you have a null modem cable ?
i have read that all technomate usb models are best
patch for the first time with a cable.
i know this might seem a daft question you say you have the 6900 super
does it have a ethernet port and a usb on the back?
and which usb port are you useing?

Am using the usb on the front.
Will see if I have a null modem cable around, deffo one on my desk in work, but that is 40 mile away.
Yep USB and Ethernet on the back, Just eye balled it to make sure
Could try the usb on the back :s:

Cheers

[harlequin]

Make sure your loading the correct patch for your box.Double check the model number the patch is for m8

Cheers, think its right.....

[benny/9]

Cheers, think its right.....
************************************************
i would give it a go with a null modem cable mate
i have the original 6900 with a usb on the front only
and i always used that for patching after a fist patch with
the null cable,but i now changed to a clarke-tech 5000 HDc plus
and this is the same spec as the tm 6900 super.

[harlequin]

************************************************
i would give it a go with a null modem cable mate
i have the original 6900 with a usb on the front only
and i always used that for patching after a fist patch with
the null cable,but i now changed to a clarke-tech 5000 HDc plus
and this is the same spec as the tm 6900 super.

Cheers, Got 664p loaded from the null modem:jiggin:

[Tavveli]

hi i'm new i want 2 patch TM 5200d but i dont know whre to go or how to find it could you help me please thank you...

[.: JaCkPoT :.]

Use the other stickies

[willie g]

Can anyone please tell me when the last patch for the Technomate 5400 was available ,the last one i had was at Christmass time ,only thing thats on ,on my box is Serius Sat
Do you have to load the softcam before a patch Cheers in advance Willie G

[.: JaCkPoT :.]

Not sure but i think yesterday magic released some new patches..

[RDK_SAT1]

hi guys someone pointed me here but where are the downloads for a technomate 5400ci+usb im a novice to this so hope i havent done anything wrong here by asking or posting :) thanks

[benny/9]

Can anyone please tell me when the last patch for the Technomate 5400 was available ,the last one i had was at Christmass time ,only thing thats on ,on my box is Serius Sat
Do you have to load the softcam before a patch Cheers in advance Willie G
************************************************** ******
the latest patch is jan 18, but even with the patch
you have if you press menu on your remote and go to options in
the receiver menu and turn the A/U off exit the menu and save the setting
then load the softcam digi-tv will open

[benny/9]

hi guys someone pointed me here but where are the downloads for a technomate 5400ci+usb im a novice to this so hope i havent done anything wrong here by asking or posting :) thanks
************************************************** ******
look in this section at the top at the posts in red
and you will find the patches

[dave8555]

How long do you have to wait for AU? I get to the stage where the patch has loaded and the 5400 has re-booted. Do you switch off and on after re-boot? (unclear in instructions). Also, when loading softcams etc, unit doesn't re-boot, is this ok?

[alunfennell]

Some times It can happen that after the softcam loads it does not reboot, I normaly just use the previous Softcam and wait for the next new one to come along.

Regards:
Alun

[willie g]

Sorry for bieng thick but what is softcam,and do you have to load softcam befor a patch ?
thanks in advance Willy G

[despdan]

Sorry for bieng thick but what is softcam,and do you have to load softcam befor a patch ?
thanks in advance Willy G


load the patch first. softcam lets you watch some scrambled channels.

[kamuk]

Hi guys, thanks for all the posts in here. I had the same problem with opening the zip file in explorer but as directed I used firefox instead and it did the trick. things can be easy if you know how!

[speedo]

Hi
I would like to know what
is the difference between
a patch and keys.
Thanking you.

[benny/9]

Hi
I would like to know what
is the difference between
a patch and keys.
Thanking you.
*************************************
the patch is the receiver official software that has had third party additions added to it in order to make it open some of the providers scrambled channels without the need for cards or cams the softcam is a key file that contains all the latest known keys in the file and is loaded to open any channels that the patch opens, after there has been a key change, if there are any major changes to the encryptions or the autoupdate gets knocked out a new patch is needed to fix this type of problem

[technoboy]

Hi,
I can't seem to get the latest patch for the Technomate 5400 super to download.
Winrar is telling me the file is corrupt?
All the others have worked ok. Any ideas?
Thanks

[.: JaCkPoT :.]

Use firefox browser and redownload..
There is a link at the bottom of forum

[mr max]

wer can i get a sofcam keys 4 tecnomate 5400ci?

[xypmyp]

i am wondering what`s the combination of keys to enter on changing key menu

[.: JaCkPoT :.]

Menu, system info, cas menu

[viper811]

Hi, i seem to be having problems still, i have downloaded and extracted the patch, i have installed it onto my tm6900 via front usb, i have tried to do the same with the softcam but i cant see it in the usb menu, what am i doing wrong? Any help would be gratefully recieved.

[.: JaCkPoT :.]

This a a major problem and i have no idea how its fixed..benny/9 will come and help you out soon

[gillgurgle]

anyone have ideas on how to patch a tm 1500ci+ using an intel mac ??

[Philthy]

Hi guys, complete newbie here.
Just bought myself a technomate 5400 super, and I'm about to try patching it. From what I can gather, it seems to be a case of download the patch, and installing it, then downloading the cam updates, and installing them to?
I'm just sat here watching the F1 qualifying on the new kit, despite the mount being temporary (moving in a month, at short notice).....looks like I've got a bit of reading to do ;)

[benny/9]

Hi, i seem to be having problems still, i have downloaded and extracted the patch, i have installed it onto my tm6900 via front usb, i have tried to do the same with the softcam but i cant see it in the usb menu, what am i doing wrong? Any help would be gratefully recieved.
************************************************** *********
if you turn your receiver on and on the remote
press>menu and go to system information>click>ok
on the second line down on the next panel s/w version
do you see the patch 6.74 and the date if you do the patch has
loaded, exit the menu and press menu again and this time go to
option>click>ok on this panel you should see serial mode OFF and
all the other lines set to ON if you do then exit the menu and load the
latest tm softcam this way download the softcam and remove it from
the zipped folder then transfer it on the memory stick ready to load
[that you have deleated all the other file from it] next turn the receiver
on and put the stick in the front usb port and press the usb button on the
remote and go to data transfer>click>ok now you will see the file panel
with the softcam on it just click>ok again and the softcam will load
[do not press any of the coloured buttons] when loaded your chns will
open try any digi-tv chn on thor 1w

[sebull]

are there patches / cams for all encoding systems?

Can I pat**ch S**KY U**k and is technomate 5400 Ci good enough for it?

Sorry for asking so many questions, is technomate 5400 any good, and if you already have it what would be your next buy and why???

[mem108]

PLEASE HELP

I need to update my Technomate TM3200D - CY channels are not working

Thanks in Advance

[benny/9]

PLEASE HELP

I need to update my Technomate TM3200D - CY channels are not working

Thanks in Advance
************************************************** *****
the patch cant open them channels mate

[mem108]

Please can you guide me on how to sort this out

All was working up until Friday when some of my channels stopped working

I bought my technomate last xmas
the guy who gave me the box with nova card said it would allow me to watch these channels (gr + cy)

i do not know what to do to fix this

Any help is much appreciated

Thanks again

[benny/9]

Please can you guide me on how to sort this out

All was working up until Friday when some of my channels stopped working

I bought my technomate last xmas
the guy who gave me the box with nova card said it would allow me to watch these channels (gr + cy)

i do not know what to do to fix this

Any help is much appreciated

Thanks again
********************************************
i take it this is a official subscription card for these channels
and it was for a 12 months subscription? if some channels are still open
have you tried a re-scan of the receiver so channels could have changed frequencies. next are you useing the card in a cam or the card reader thats
built in the receiver, i ask this because if you have reprogrammed the cam
or changed the patch that could be why you have lost some channels

[.: JaCkPoT :.]

I think hes on about a gamma card, because the nova channels are called novasports1 cy, novasports2 cy..etc..
Anyway mate, you will need to get out your cas3 programmer and download the latest bin file to it..

[bitten]

i guys im a bit new on this stuff about sat. i've got a tms1500ci+ for the last 3 pr 4 mouths and just now cames one message on screen for moust chanells ( scramble channel ) and one knows the password
i tryed ( 0000-1111-9797-1234-4321-9876) and nothing. thks.

[degmeister]

What patch can i use on a TM-6900 HD Combo?

[linus]

Hi New to Sat and Digital Kaos.
Recently purchased a TM5400 pre loaded with channels for motorised dish however I have an 80cm dish will upgrade to motorised dish once I know what i'm doing.

I am not sure if I require the latest patch and softkey. Can anyone help I do get a few FTA channels.

[rafique]

hi can anyone help please i have technomate 1600 2ci i have patch it today but no picture it says scramble channel

[Manic01]

hi can anyone help please i have technomate 1600 2ci i have patch it today but no picture it says scramble channelAfter patching load latest softcam and digi tv will clear on 1 west.

[rafique]

help how do i patch and whats the latest patch please

[mtv1]

http://www.digital-kaos.co.uk/forums/f75/noobs-guide-patching-your-technomate-7310/ have a look here m8 good luck also here http://www.digital-kaos.co.uk/forums/f75/technomate-loaders-30039/

[rafique]

i am having problem how do i put the latest softcam and how do i find it

[Manic01]

Softcam here
http://www.digital-kaos.co.uk/forums/f75/technomate-softcam-updates-273/index41.html
Load same as patch but select Keys tab.
Loader here

[mtv1]

http://www.digital-kaos.co.uk/forums/f75/noobs-guide-patching-your-technomate-7310/ read this m8

[jmal555]

Hi,

noobie with a TM3500 USB. I've tried to follow the instructions with no luck.


Guide for the newbies.

Heres how to load the patches.


Download the relevant patch and extract.
Download the relevant loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait.

- I downloaded the 3000_series_05-03-2009.zip and extracted it
- I downloaded the 3150_3500_USB_Loader.zip and extracted it
- I connected my PC using a USB2RS232 and serial null modem cable
- I selected the right port (5)
- I opened the loader and selected the software tab
- I pressed browse and found the extracted patch
- I get a message "This file is not a software file, please select another".

- I've redownloaded the patch and an earlier version of the patch and all give the same problem.

- Should the TM3500 be on or off when attempting the upload (tried both)
- Is there any settings required in TM3500 when patching (didn't find any).

Thanks.

Edit. Looks like the Patch was wrong (got that from a friend) and after couple of postings I was able to download the correct one from here. I'm currently attempting to patch the TM.

And the result was that this TM3500 USB PVR model did not need null modem cable, but USB stick upgrade was possible.

[coficymru]

Tried following this guide, trying to patch a 3300 2ca box, problem i have is that its been transferring for 15mins and theres no change, how long should it usually take?

thanks cofi

[.: JaCkPoT :.]

mate...your using the wrong port or you ned to turn the reciver off from the back and turn it back on when prompted!

[zaf786]

Hi i have bought a technomate 5200d usb while i wait for my dreambox to comeback from dm after repaired can ipatch this reciver if yes where do i need to look for software i am intrested in 1 degree west

[.: JaCkPoT :.]

sticky threads mate!

[DannoUK]

Does installing a patch wipe anything? In particular the satellite positions if they were setup manually?

Thanks

Dan

[elly13]

how do you know when technomate needs repatching i have the 1500ci i am using the diablo and the digialb

[foot]

hi please help me with softcam key

[opsmonkey]

you wont get much help by posting in a sticky.. create a new thread and explain excatly what you need help with..

eg..

reading and undersatnding
inputing
finding location of keys

[siroja]

Hi! Does anybody know how to enter keys manually on technomate 3100d from remote control. Thank you!

[opsmonkey]

see post #114

[george69giza]

:driver:thanks for the info
just got myself a TM5200 and not sure about it
i previously had a eurovox and worked a treat
can i get the same channels on my tm5200 ?
im using my fixed sky dish
be grateful for sum advice

[krazylegz]

no mate as sky is not hacked like cable

[vvs]

Hi. Where can i find patches for tm3150d?

[bimbam]

Hi, Wasn't sure where to post this but I have a tm-6800 (non super) and one of my issues was that the video recorded was in the trp format (cant play it on ipod etc).
If you want to use the recorded video from one of these boxes get a piece of software called,
wondershare HD video converter
Ive just tested it out and it converts it to any format you want and didnt take too much time either.
shame the box itself doesnt save recorded video as avi or similar.

[rylystyk]

hi i am totally new to this site and the technomate world but last time i bought the TM3200,and i read some useful information here in this site. the problem is while i am using the darkman loader i can't open the patch(i ve extracted the the rar file but all in it is a bin file not a software)
hope someone got an idea
tnks a lot, peace

[Manic01]

It's meant to be a bin file.

[bonker666]

having a prob lem with the 8281 menu after patching... any help?

[Dariusek]

Hi.Great Forum :congrats:. I have just bought technomate 6900 combo super. Can any one please tell me, do i have to load the newest software from technomate prior to load the newest patch:hmmmm2:Thanks

[dick b]

Hi.Great Forum :congrats:. I have just bought technomate 6900 combo super. Can any one please tell me, do i have to load the newest software from technomate prior to load the newest patch:hmmmm2:Thanks

patch 1st then soft cam. the patch will overwrite the official technomate software.but be aware softcams are dating very quickly at the moment.

[Dariusek]

patch 1st then soft cam. the patch will overwrite the official technomate software.but be aware softcams are dating very quickly at the moment.

Thanks.Please correct me if i am wrong.i can overwrite not updated technomate software with the newest patch then soft cam.Do i lose channel list?

[dick b]

Thanks.Please correct me if i am wrong.i can overwrite not updated technomate software with the newest patch then soft cam.Do i lose channel list?

no you will not lose your channels providing you do not do a factory reset,even then providing you you do a"save as default"( do this twice) you should be able to re-install them
but I"ve found it doesnt always work.you will only need to do a re-set if you find any bugs.
any software you put in either official from tecnomate or 3rd party will simply overwrite whats already there and you can switch back no problem providing you have a copy of the file in your computer.

[flejty]

Can any one help me? I`ve got Technomate TM 3400 Ci+, I try install the patch.

- I downloaded the 3100_3200_3300_3400-P-07-09-2009.zip patch and extracted it
- I downloaded the TM-3000 SeriesV1.1.3.zip loader and extracted it
- I connected my PC using a USB2RS232 and serial null modem cable
- I selected the right port
- I opened the loader and selected the software tab
- I pressed browse and found the extracted patch
- I pressed start button
- Loader shows Transfering... but no action I can disconnect cable, turn off switch on back
no message still transfering... but doesn`t work

Where can i find patches for TM 3400 CI? I found one but when a click on link, it`s blank
screen only. Thank you.

[Manic01]

TM patch for 3100, 3200, 3300, 3400 Models Only 07/09/09

07.09.2009

DigiTV AU

[userjoe]

Why i do not have Biss menu on my Thechnomate 5400.Is it because it not patched?

[dick b]

Why i do not have Biss menu on my Thechnomate 5400.Is it because it not patched?

yes mate it needs patching to get the cas/biss menu up.

[ryzhyk]

Hi Guys.What is the last patch for technomate TMS 1500CI+
And where i can get it?
Thanks

[bosvelt]

on the technomate frontpage red stickys, if you have the latest patch then load the latest softcam.

[ferretcomputers]

Hi
got a question i am on thor 1w channels all work but tv guide say no info on most channels is there a patch or softcam im missing any help please searching though 50 plus channels for the match is a pain
daz

[yas87]

hi im newie to this technomate thing can some1 recomand me a good reciever that i can get so am able to watch free sports channels on french italian , german and arab channels i was told that technomate 500 is a good one

[barlovento]

HI there’s not tecnomate 500 but for what you require tecnomate 1000 o any of the tecnomate is good for peeking up this channel ok

[barlovento]

HI there?s not tecnomate 500 but for what you require tecnomate 1000 o any of the tecnomate is good for peeking up this channel ok

[yas87]

HI there?s not tecnomate 500 but for what you require tecnomate 1000 o any of the tecnomate is good for peeking up this channel ok


what wpuld you recomend and is technomate 5400 any good and would it only need a patch or a key of some sort

[st_patrick]

well folks the fella who set up my technomate 5200d has left me a little in the lurch and has not updated my box since sept so im tryin to find out how to do it myself any help would be great i think i need a technomate loader softcam and patch i know i need to update box with a usb pen i havent a clue how to find the things i need for updateing the box lookin at some of the downloads available on this site i dont see my version of technomate mentioned and no patchs since sept maybe their still unavailable anyhow ? ....any help would be great its doin me head in tryin to find help on web this site is the best site i have found for tech help so far ....thanks

[dick b]

well folks the fella who set up my technomate 5200d has left me a little in the lurch and has not updated my box since sept so im tryin to find out how to do it myself any help would be great i think i need a technomate loader softcam and patch i know i need to update box with a usb pen i havent a clue how to find the things i need for updateing the box lookin at some of the downloads available on this site i dont see my version of technomate mentioned and no patchs since sept maybe their still unavailable anyhow ? ....any help would be great its doin me head in tryin to find help on web this site is the best site i have found for tech help so far ....thanks

the patch from sept will still be ok you just need to put the latest softcam in,if you load with usb stick you will not need loader.I enclose softcam,unzip then load onto stick.put stick in box go to usb menu then data transfer highlight the softcam in the file list and press ok.digi tv should then open.
you can check patch is turned on by going into the "system information menu" you should see CAS/BISS if not type in 2004 on the hand set this will toggle patch on/off.

[npire1]

Hi, Does anyone know if patches can be downloaded and installed using an apple mac. I am a newbie and want to download and learn how to patch my TM 31OOD

[Manic01]

Not compatible with Mac I believe.

[big dave]

hi can anybody tell me when the latest TM 6900 HD
was posted?

cheers

[technomate]

is your tm 6900 hd standard or super?
regards,tm

[Aguero]

Another newbie here, I'm just about to order a sattellite, the 6800 HD standard. Is there much difference between in what this model and the other models can unlock, would you recommend a different sattellite or model?

Also correct me if i'm wrong, but you download the patch install that, download softcam and install that. The softcams keep the keys in the patch updated so the channels remain open correct?

Say for example one of the keys changed, would the channel become scrambled or would it remain open because of the softcam updating the key?

I'm going to have a moterized set up, a friend of mine should be helping me set it up, I also want other foreign channels like arabic music etc, would i be able to search and add these channels after a patch and cam update or would i be limited to the channels which are unlocked by the patch and cam?

One last thing (Sorry first post and its very long too many questions) is there anyway of getting more channels unlocked? I'm mainly looking for football (prem/italian/spanish/champs league) as well as movies in english if possible. I heard something about a diablo cam or something not sure but yea could you let me know please.

Sorry again for the very long post and thank you for your help and time.

[dick b]

right to start off a lot of people are now buying LINUX based boxes as you can do more with them I"d ask in the general or technomate satellite normal thread section about them as I know nothing about them.
as to the TM6800HD I have one and they are great to start out on and easier than linux boxes for someone just starting out with user friendly menus.
they are patchable just read "noobs guide to patching your technomate" in the technomate sticky section. and you are right on how to do it.if the keys change someone will post them in a new softcam to load.
the patch will not stop you searching for any FTA channels on any satellite that you can receive.
I dont know about cams either but dont think they open much more than softcams.
all the help you need in setting up can be found on this site

[luchoe]

Hi all,

I downloaded the latest patch for my new Technomate 6800HD original and I see I can't watch Digi TV (I did the download using the USB/Data transfer menu) I read that I need to install a softcam as well, afterwards...Where I can find the latest version of TM 6800HD original softcam?

Many thanks in advance

Kind regards

Luis

[dick b]

you will find them at the top of the technomate page under "softcam keys" meanwhile here is the latest one thanks to technomate.

[luchoe]

thanks! do you know if this opens digi TV??

[Blade32]

Hi all, i bought new reciver technomate, what do i need first? Do i need to update,softcam or just patch it? Plz by beeing the new to this can someone explain it to me thanks!!

[dick b]

Hi all, i bought new reciver technomate, what do i need first? Do i need to update,softcam or just patch it? Plz by beeing the new to this can someone explain it to me thanks!!

you need to download the latest patch that is specific to your box (you will find it lower down in the stickies) then unzip and load patch onto a usb stick put stick in the stb and go to usb menu>data> highlight patch>ok you then do the same for the latest softcam.(found at the top of the stickies).you will also find a tutorial on patching your technomate at the start of this thread.But unless your dish is motorised patching is of limited use as most of the channels still open are on THOR at 1West.

see post#176 I"ve posted what you need

[dick b]

I"ve found the patch and softcam you need thanks to "fearona" Its patch 1st then softcam.

[wazurk]

Hi, sorry to ask what may be obvious, I would like to get footie possibly on thor but patched with the official Technomate patch VER689 and used a recent softcam file but don't seem to be getting anywhere what is the difference between those patches and the ones listed here? I have TM6800 HD (non super) and 90cm motorised, any help please.

[dick b]

official software is no good for softcams. you need patch 690p which can be found in the stickies along with the latest softcam patch 1st then softcam then digi tv will open at 1West.(do not use patch 691p its faulty)

[apbms1]

hi, newbee alert - i've read this whole thread and several others and have come to a stop.
I have a TM6800HD super +, ive updated it with the following file "Magicpatch-TM6800HDSuper-05-03-2010_721p.stb" via my usb stick - loads ok, restarts. but i still dont get the 8281 menu. I have enabled DHCP and its connected to my router ok and has a IP address and i can ping the TM box from another pc on my network, so i know the ethernet is up. any ideas cheers.

[apbms1]

for info, i found this on another forum

68/69/7100 addon pack - Digital World Cable Satellite Console Forum (http://www.digitalworldz.co.uk/227247-68-69-7100-addon.html)

this addon patch now enables the 8281 menu :)

[denray]

Many thanks for that, I'm a newby to all this much appreciated. I presume you do not need the loader if using USB. Have Technomate 6800HD.

[mixanik]

Hi everyone! I have the receiver a month, I want to I do upgrades! but since I'm young, how to do it;;;;

[Manic01]

Read the stickies.

[combo007]

Guide for the newbies.

Heres how to load the patches.


Download the relevant patch and extract.
Download the relevant loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

Download the correct patch for your receiver.
Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick. Insert your usb memory stick in the usb port under the front flap.
Turn the receiver on ready to load the patch then press the usb button on your remote.
on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk and Benny/9
thank's it is the first time i see a clear summary for my tm (usb).

but what are hte differences between all the new patches?

[jackalg1]

Hi would it be possible to let me know the latest Patch Version for the TM6900 COMBO

Also would anyone have a ready made Free-Sat channel list

many thanks in advance

[KevD]

Hello Jack-pot & Benny,
I am a newbie and I need to patch & install soft cam on my Technomate TM-7100 HD box to open up channels. I have installed a motorized 1 metre Orbital dish and I can view a number of Satellites. However lots of channels are scrambled so I want to use my USB to install what I need for this Technomate 7100. You say it's important to get the right patch for the right box, but I can't see a patch for this box on the Forums.
Any help would be really appreciated.
KevD.

[blueboy510]

Hi, My mate and I both have a TM5400 CI+ Super and he lost Digi yesterday. The new softcam isn't making any difference, so he wanted to load the latest patch. Problem is, when he tries to upload the patch from the USB, it tells him it is an incompatible file. It was suggested to force an update, but the guide was based on a different TM receiver that had a menu button on the front (as it involved holding that while turning it on).

Can anyone help? I have thought about a factory reset, but of course he would lose everything?

[.: JaCkPoT :.]

DigiTV is now Nagravision 3 and is no longer piratable!

[blueboy510]

DigiTV is now Nagravision 3 and is no longer piratable!

As far as I am aware, it is only the Hungarian tier that has now gone N3 - the rest is fine - more importantly, mine is still clearing

[Manic01]

Correct...

[satamigo]

Hi!
My TM-6900 HD COMBO doesn't turn on after update. Has anybody a flash dump from this model?

[cibo80]

Hi lads , i am a newbie here , i have to admit that i know nothin about satellite but i need your help...
i have a TM 3000 working on Thor sat and about 3 weeks ago i lost almost all channels that i was interested in ( digi tv - romanian channels)...is this a manageable problem or i have to forget about my TM and think of another solution ?
thx in advance....!

[max5623]

Have followed above up to "press ok on the highlighted patch", but none of them load.
Instead each gives a message "invalid firmware"

[max5623]

Model - TM-5400 CI+ USB Super+
Software - 1.16 (25-8-09)
Hardware - 1.10
Boot ver - 2.01 (08:50)
CH version - Feb:09

[humans first]

Can any of you good fellows tell me which is the latest patch and softcam keys for my Technomate TM-5400+USB Super + box? I attempted to load a magicpatch but it said it the file was incompatible and I'm struggling to watch footy.

[redstealth01]

very usefulpeople in here
where can i get the latest patch for a 1000 series

[QCC]

where can i get the latest patch for a 1000 series

[Thomo]

u will get the latest patch for the 1000 series from the download centre.

[Guaido]

Great forum, thanks a lot for the infos! I'm newbe, so sorry in the questions are stupid...
1. do I have to make the update using the official Technomate patches, or I just to use the patch available on this site?
2. I guess the softcams are changing quite often (at least once per month?), but where do i find the most recent ones? Sorry, but I couldn't find new softcams in the download center...

Thanks in advance for any help!

[wingnutfm]

:hmmmm2:Can't seem to find any specific information for my model. Anyone know if the patch update process is the same for all models?
Some information I have read says the update must be done via serial lead and not the usb port on the back.

My EPG only shows information on the next program if I want to see whats on later in the evening I have to switch to digital to see whats on! I did contact Tecnomate helpline but they blame the service provider???

I have tried to load the latest firmware via usb but the receiver dosent recognise the connection. Some info says this may be Vista thats causing the problem.

[dick b]

hello wingnutfm,
I"v had a Tm6800HD for some time now and have always patched it and entered softcams via the USB port no problem.
technomate are right about the epg.
as to your last paragraph exactly how are you trying to do it.I dont have vista but xp does it fine.download patch and extract file,copy file to your usb stick which must have been formatted to fat 32 either in your computer or in the STB.menu>usb>disk manager>format disk>ok.put stick back in box after loading patch,menu>usb>data transfer.highlight patch>ok do not interupt the process til its finished.after loading patch do the same for the latest softcam posted in the softcam section.
I wouldnt have thought the computer operating system would have stopped you doing it but I dont know enough about computers to be sure.
I use patch 702p on my tm6800HD original and this opens bulsat on 39E bis/fransat on 5W arqiva on5E and 1 or 2 others.BUT only use a patch that is for your exact model.
one other thing download using "firefox" as your browser as IE can corrupt files.

[leventry]

Hi there Jackpot,

im a newbie for this whole satellite world. I have a Technomate TM-5000DA, i have a channel scrambled which shows seria a football matches, in order to watch it i must download some sort of Emu reciever and then use the biss code..

I had a good look at my technomate, but there is no usb slot?? What am i going to do guys, please can somebody post all relevent patches etc.. how will it work. I really want to watch this turkish channel as it shows the italian football.

Regards, Lev

[bj1]

anybody know how to patch a tm 500 for bulsat

[solo123]

So I think i have the patch in but i cant get the .key softcam file to do anything - i can see it on the usb stick if i mess around a bit - i can even select it - but i cant get it to upload? pls any help??!

[dick b]

So I think i have the patch in but i cant get the .key softcam file to do anything - i can see it on the usb stick if i mess around a bit - i can even select it - but i cant get it to upload? pls any help??!
once you have selected the file press"ok" do not try and upload.
to check the patch is in >menu>system information. I"d ask any more questions in the normal technomate section you will get more answers this section is for information.

[Dustie]

Have the 5300 Non,how do you enter manually the latest keys or frequency or symbol rate or bis etc into the tm,have checked the softcam page for latest,and it says(when the download is opened) manual key install for some keys or sats thanks.
I have been useing a usb key in the front of the machine to load only bullsat stuff until now thanks any one.;)

[pistic]

I have just bought a tech tm 5200d usb super.could anyone tell me;which sat should I point at,which channels you can receive ,what software do I need.If anyone could help I would be very grateful .I am a total newbee.Thanks

[thijs]

all patches availble in Download center (http://download.for-better.biz/bbs/main.php) just pick your own stb and download then load on usb and on your stb

[lathaimh]

Hi All, I too am a noodie. I have managed to Get Astra 1 but I am struggling with Astra 2. My TM-5402HD CI+ shows a very strong signal & strong quality (albeit red). When I scan I get some but not all channels. Can someone point to good guide to help noobies setup a disc to receive the desired satellite please?. All this trail and error is a royal pain.

[antwan]

Hi newbie here ..awaiting delivery of new tm5402hd.
can you tell me if you need cccams for one station one satalitte or one provider ie will one do ssp, sly movies , es*n, discovery channels.
Thanx
Antwan

[djbluemoney]

hi, noobie here with 5200 super usb ..can i ask do i still need to post 5 times before download is active please

[djbluemoney]

ok answered last question as can now dl ok. does the 5200d work ok with 28 East??

[Barthelemy Kyana]

Please tell where my I download the software for patching Technomate 5400 ,hey waiting for your help.

[sahilkhan]

I am looking to install Mgcamd on my tm-500 super
is that possible , if so
how do i install it

any help

[slapstick]

hi everyone. im having problems patching my technomate 3000d. ive tried the patch which i think is the latest. but without any success. can anyone tell me which is the more up to date patch for this receiver. the current software version is
V3.44. 17/07/2009. boot version 1.08. THANK YOU...

[WATTYUK]

im a n00b to sat scene but been a member on this fourum for a long time as i was into cable and still tinker, can this be done on my STB i have a TM6800HD? somebody told me i needed to get rid of it and get a linux based STB? ive had it for months now and its just gathering dust and used for watching Eastenders HD lol, many thanks people

[valveandy]

Hi all,
I am new to this digi stuff did a bit of sat surfing with a uniden (all analog) now trying to get to grips with my TM-600 is there any linux software anyone knows of that can talk to thye unit on the serial link?
ta in advance

[kay1]

What is the best technomate model?

[thijs]

how much money have you ?
Better question would be wich is the most popular at the moment? wich would be the tm5402HD

[timwebb2]

thanks to all concerned for the kelpful posts, I have just bought a second hand 5200 D super and am now more confident on how to update it, regards, TW

[guynextdoor]

Guide for the newbies.

Heres how to load the patches.


Download the relevant patch and extract.
Download the relevant loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

Download the correct patch for your receiver.
Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick.
Insert your usb memory stick in the usb port under the front flap.
Turn the receiver on ready to load the patch then press the usb button on your remote.
on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk and Benny/9
Thanks for this Benny,
I found this really useful.
Just a quick quesiton. I have a TM 5300 D+ Super

So do I simply go look under the section "TM5000 series patches" and look for the one with the most recent date on it?
Mine has USB on it. So I can I use a stick for this.
Should I first update the software with the latest from the TM manufacturers site before using the patches found in this forum?

[cocosagot]

i have technomate tm-600,can i watch romanian channels ,1 year ago i watch digi tv ,after move to nagra 3,please help.sorry for my english.

[sq2011]

There is a usb port for this model but what does it do? Can I get more channels? Will it show movies from a usb in mpeg2 format as well as jpegs and mp3s?

[dick b]

you must ask questions in the normal technomate thread section you will not get answers here as very few check this section out.

[monforte76]

I just bought a Technomate 300D and i can't watch any channel on my tv! Almost all of them are bloked. It seems that i have to pay to watch them! The satellite is Hispasat.I have to install any kind of patch to watch TV?

Thank you

[Nutsandbolts]

Hi. The HISPASAT sat at 30 west has very few channels opened at this moment because all the good channels use Nagra3 which has not been broken yet. You are probably better off to get a motor and move the dish to other satellites where you will be able to find much more channels. What are you looking for in particular?? Also what size dish do you have and where are you located??
Regards.

[monforte76]

Hi.

Triax TD 78 this is my dish. My receiver is a Technomate 3000D. The guy came to my place and installed everything.I live in Luton UK. i really want that satellite cose i want to watch portuguese tv

thank you

[Nutsandbolts]

Hi. I only know 2 Portuguese channels on HOTBIRD which are available for your receiver ie RTPI and TV GLOBO. You can ask in this forum if channels on HISPASAT are available but its probably best to start new thread in the TM section. Regards.

[monforte76]

Thanks for your help. I really want that satellite cose i want to watch football and in those 2 channels im not abble to do it :(

thank you

[Nutsandbolts]

Hi. RTPI show live Portuguese matches and GLOBO show live Brazilian football. Which football are you interested in? Regards.

[B3NJY]

Technomate TM 5402 HD Super CI USB PVR LAN SAT Receiver

Do I have to update oem firmware first before flashing custom img ?

Great site plenty of support...love it
benjy :)

[monforte76]

Hi. is only 2 channels. on Hispasat i can have all of them but i don understand why they are bloked!
Do i have to do some upgrade on my receiver?
I read here something about a patch. but i dont really know what that means!

Once again thank you

[mikiemo]

Hi. is only 2 channels. on Hispasat i can have all of them but i don understand why they are bloked!
Do i have to do some upgrade on my receiver?
I read here something about a patch. but i dont really know what that means!

Once again thank you

All the channels that you want to watch are encrypted in nagravision 3, this encryption system has not been hacked
So you will have to either buy a legitimate subscription or go the card share route(we cant talk about c/s on here) so google it

Regards Mikiemo.

[cocosagot]

i have technomate tm-600,can i watch romanian channels ,1 year ago i watch digi tv ,after move to nagra 3,please help.sorry for my english.

[Manic01]

No sorry..........

[pun1t]

hey im new the technomate system... i've currently bought a TM-500 super and i was wondering how i can set it up to watch pay channels

[eigh8plus]

Pls which is the up-to-date patch for technomate tm 5402 hd? I just got a brand new and don't really know what to update to get the best it could offer.
Your step by step guide will be appreciated.
Thanks.

[dougsax]

DOEs it work for tm 3100 d as well ? how can i enter the keys manually ?

[Manic01]

Read the thread correctly.

[patrik22]

hi need help I instal the key on tm 5300+usb super witch I ubdate to 2012 version a did search for some channels but the channel are style locked any help please

[dougsax]

i have a technomate tm 3100d, i just cant get it to patch, downloaded all loaders that is possible, tried to patch it on my windows 8 laptop by Usb to rs232., desktop windows xp by rs232 to rs232, nothing seems to work, last loader i am using is : TM-3000 p-series v1.1.5.
Patch : TM-3100-200-300 series p-v2.43 22-01-2010
plz help ..................... :)

[patrik22]

hi need help I instal the key on tm 5300+usb super witch I ubdate to 2011 version a did search for some channels but the channel are style locked any help please

[Charlie70]

Hiya,
Just wanted to say thanks for the USB explanation - the manual is not the easiest document to extract useful info from. I managed to update the firmware with the official TM7102HDT2_115 without fuss.

I didn't see many 7102 related posts.. have I bought an unpopular receiver or is it SO good no-one has problems with it? (fingers crossed!)

[bowking]

im new here and have just got a tm-3500 d+ usb whats best patch to use?

[jossyboy]

newbie to all this, just wanted to know how to patch a TM-6900 supper-combo and the latest items that would be required, any help?

[mahlonm]

Which is the latest patch ?

[technom8er]

Hi all,
I'm new on this site, started reading from the first page and learned a lot .
Almost everithing is explained.
Thanks to jackpot, benny/9, dick b, thijs and others.
you were very helpfull
Advice for newbies : START READING FROM PAGE 1

[kkd9]

ve gone through the steps and nothing is happening, i get disconnected anytime i try to update, help will be much appreciated

[tm5402]

:stoned: where is the technomate download?

[tm5402]

How do i do anything with this box

[alcammo]

Good evening Guys,im totaly new to all this,so sorry for been a bit thick about this,where can i find a new image to flash my box.
many thanks Alan:top:

[elmo11]

I just join and i was trying to patch my tm5400 ci usb. I got the patch downloaded into usb plus softcam keys. I applied all as advice above, i am still having the scramble channel message. I also waited few minutes after downloading and its still showing. could anyone advice? I used usb to dowloaded it all and i am pretty sure its downloaded cos the numbers ran to 100%.!!! thanks

[Nutsandbolts]

I just join and i was trying to patch my tm5400 ci usb. I got the patch downloaded into usb plus softcam keys. I applied all as advice above, i am still having the scramble channel message. I also waited few minutes after downloading and its still showing. could anyone advice? I used usb to dowloaded it all and i am pretty sure its downloaded cos the numbers ran to 100%.!!! thanks

Hi. What patch did you download?? You can check in MENU - SYSTEM INFORMATION. What channels are scrambled???..

Regards.

[mdt]

Anyone help with a patch for the Technomate 7102 HD super Please THANKS

firstly read the rules again! you need to patch your box with 3rd party firmware(@phantompatch) then press 8281 to get into the special functions menu. you can add the info with the remote,regards mdt

[panchoee]

how do i go about get the loader for my TM 5402 hd m3 ci every time i try to get the loader i have amessage saying im not allowed to download it help plz

[digicon]

how do i go about get the loader for my TM 5402 hd m3 ci every time i try to get the loader i have amessage saying im not allowed to download it help plz


Just curious why would you need the loader

[mivojo]

Hello there,
I'm a newbie.

I'm hoping you might be able to help me. I live in Germany near Leipzig and I have set up a 150cm dish and the technomate 5402 receiver pointing in the direction of Intelsat 907 (27.5 W). When I tried to decode the 11 british programs with a USB stick and started up again the satellite list disappeared and only sky 28.2E Astra was positioned at the top of the satellite list. Below it the same list continues with "0.0 E". I followed the instructions, so I'm not quite sure what I did wrong. Is ist possible/necessary to recover the list or can the codes be decoded without actually getting the list back? Do you know where I went wrong? Because I did exactly what the Utube instructions told me to do and then all this happened. What I find odd is that I tried to find the place to put in the BISS codes in, to open the codes manually by pressing 8280 on my remote but that doesn't seem to work either. Can you please advise further. Even if it means going through the procedure step by step.
When I download the zip file via usb and open it I'm not quite sure what the name of the file is that needs to be installed.
In principle I have the following questions: a. what actually decodes the coded channels. I know my dish is facing the right direction, but the signal strength doesn't show anywhere. When the
TM 5402 is decoded will the satellite signal then appear? With each new try do I need to reset the receiver each time?

If you confirm that the TM 5402 is ruined, my second alternative is an icecrypt s1600chd with which I have been able to download the channels, but they show up with key codes, too.

I also tried to decode them, but in the instructions it says that the custom firmware is not the latest version and that I would need to connect my ethernet cable to my router. I have only got a mobile router that doesn't have an ethernet socket. So there again I am stuck because I don't know that much about how to update without ethernet cable and whether there is an alternative. I would be very grateful for your help. It is the 3rd year now without British TV.
Kind regards
Michael

[den1]

HI Michael
For us members to help you out, there are a few things we have to ask.
Are you just after this one satellite at 27.5w.
Is the dish fixed or motorised.
Is your TM5402 Patched and what Mark is it

Once we know these few answers, we can help you get the channels that you require.

DEN