1C0 909 605 B Pinout

[dij16]

Hi, passat 3bg airbag unit 1C0 909 605 B, i need pinout +12, gnd and k line, to try connect with vageeprom programmer to clear crash data.

Thx

[matik185]

https://obrazki.elektroda.pl/9927089300_1314259585.jpg

Use VCDS..

[dij16]

Thanks, i have tried with kkl cable but it says "No ECU found", with vcds i can open airbag module see codes, but what you mean by "use vcds.."? Can i use vcds with vageeprom to read airbag dump and clear crash?

[matik185]

Yes you can .. just connect using VCDS, connect with Airbags and simply erase DTC codes.. it will erase codes and delete crash !

[dij16]

Use VAG EEPROM Programmer with vcds cable or just with vcds software, I have tried to connect with vcds and vcds software, go to airbag and clear codes, "crash data stored" goes away but just for one opening module, on next opening module with vcds "crash data stored is there". How to use vageeprom with vcds cable?

[myma7up]

I think it's impossible to clear crash with vcds