CAN'T CONNECT CARPROG WITH AUDI 8D0 959 655 J airbag ecu

[Panathaole]

Hi

as title says, i try to connect the carprog with audi airbag ecu 8D0 959 655 J but

i can't... i have no response from ecu..... and i don't know if the problem is the carprog or the airbag ecu....

is possible to connect this ecu with upa 1.3r2?



604315

[guerraa]

Hi, can you get it to communicate on bench with vag com connected only to ground / plus / K line ? if Yes then, maybe you need to Read/Write VW-Audi airbag sensor microcontrollerCR16 internal EEPROM to short processor pin 13 to GND, and then try to read again with Carprog.
If it does not communicate with vag com on bench then your problem is other....

BR

[Panathaole]

Hi, can you get it to communicate on bench with vag com connected only to ground / plus / K line ? if Yes then, maybe you need to Read/Write VW-Audi airbag sensor microcontrollerCR16 internal EEPROM to short processor pin 13 to GND, and then try to read again with Carprog.
If it does not communicate with vag com on bench then your problem is other....

BR


what you mean with plus? 12V power?

[guerraa]

Hi Yes 12V.