romaiz96
17th March, 2019, 03:07 AM
Hi guys,
I've got a corsa d 1.3 diesel 2007 z13dth which had the common problem of water getting into the ecu so I opened ecu and the circuit trace had corroded on the side from ecu sitting in water so I cleaned up my ecu with isoproply and soldered a jumper/wire before the corroded area to the clean part of the circuit and I replaced 2x 100 2512 smd resistor but still have no communication.
Any help will be very much appreciated
Thanks
Sent from my SM-G960F using Tapatalk
I've got a corsa d 1.3 diesel 2007 z13dth which had the common problem of water getting into the ecu so I opened ecu and the circuit trace had corroded on the side from ecu sitting in water so I cleaned up my ecu with isoproply and soldered a jumper/wire before the corroded area to the clean part of the circuit and I replaced 2x 100 2512 smd resistor but still have no communication.
Any help will be very much appreciated
Thanks
Sent from my SM-G960F using Tapatalk