Renault Traffic Kess Problem

[mrspls]

Hello, I have a Kess V2 clone. normal time I can read and write without problem but yesterday when I reading Renault Traffic 2.0 DCI get %100 and after give me a error message. I controlled the file is correct but gave error. How can I solve the problem ? and my kess is can read and write this type ecu via obd or cant ?

car inf:

Renault Trafic 2014 year 2.0 DCI Bosch EDC17C42

HW: 1754R
SW: 1037545242
VIN nr.:
SW ver.: 3316R
Spare:
Engine:
HW Ver.:
SW upg.: 5661R

[Hexer84]

Fault pic?

You send an image from Bosch BMW ECU.

Gesendet von meinem SNE-LX1 mit Tapatalk

[mrspls]

Fault pic?

You send an image from Bosch BMW ECU.

Gesendet von meinem SNE-LX1 mit Tapatalk


Awhh sorry this is my mistake I will upload right pic.

[crank54]

Fault pic shows only ecu photo
you should post fault picture

[mrspls]

Fault pic shows only ecu photo
you should post fault picture

fixed please look again

[teerak2uk]

And you did this obd!!!
This needs doing on bench

[mrspls]

And you did this obd!!!
This needs doing on bench

So am I have to use k-line? Is it impossible via obd ?

[teerak2uk]

So am I have to use k-line? Is it impossible via obd ?Bench it boot mode with ktag is safer I think some people say they managed by obd but must save injector codes first because sometimes when writing modded file back they get lost

Try can or Kline see which works but go into tools menu for injector codes

[mrspls]

Bench it boot mode with ktag is safer I think some people say they managed by obd but must save injector codes first because sometimes when writing modded file back they get lost

Try can or Kline see which works but go into tools menu for injector codes

Thank you mate, I will try it with kess v2 via boot mode. But I newer see injector code backup menu in ksuite with Renault Trafic. I will search that.

[Hexer84]

U have to use ktag not kess.

Gesendet von meinem SNE-LX1 mit Tapatalk

[mrspls]

Bench it boot mode with ktag is safer I think some people say they managed by obd but must save injector codes first because sometimes when writing modded file back they get lost

Try can or Kline see which works but go into tools menu for injector codes


U have to use ktag not kess.

Gesendet von meinem SNE-LX1 mit Tapatalk

Thank you friend, Im upset :(

[teerak2uk]

Thank you mate, I will try it with kess v2 via boot mode. But I newer see injector code backup menu in ksuite with Renault Trafic. I will search that.It will be under tools but not required if doing boot mode