PDA

View Full Version : 2012 citroen DS5 proxy go key program



sdnatlst
20th March, 2019, 12:38 PM
hi all i have a customer with AKL on this car,

i have searched DK and found some years ago people saying only transponder can be programmed by most machines,

i also see on IQ for mvp pro it says X against the remote meaning it wont code?


being a proxy key obviously remote and proxy must work for my customer, any advice?

i have lonsdor k518, MVP pro, hoping one can do it?

comizelu
20th March, 2019, 01:16 PM
There was a video on YouTube with lonsdor programming a Peugeot 508 2012 if i remember.
Probably can do akl as well.

Sent from my MI MAX 3 using Tapatalk

p1et
20th March, 2019, 01:27 PM
508 is something different, no problem at all. For DS5 to make proxy work, apparently you need dealer tool but some people managed to program proxy remote manually but only for particular models of DS5. Please read AD forum, you can find info about that.

sdnatlst
20th March, 2019, 04:12 PM
thanks unfortunatly i dont have AD forum access as i bought my unit 2nd hand :(

p1et
20th March, 2019, 04:52 PM
But maybe Lonsdor can do it fine, I wouldn't be surprised actually.

sdnatlst
20th March, 2019, 05:11 PM
Yes lonsdor has it listed, im just worried because keys are £60 and if it locks but doesnt work the remote/proxy,, i cannot use again and customer wont accept :(

p1et
20th March, 2019, 05:18 PM
But even if proxy won't work, I think you can reprogram them with other tool like Lexia/Diagbox and everything will work. Lexia work for sure because on AD forum someone tried. It's very cheap and worth to have. Maybe you have Diagbox? If yes, then read PIN code with Lonsdor and program with Diagbox and take cash :D

sdnatlst
20th March, 2019, 05:21 PM
Also i wonder if you know does it have VA2 or VA6 lock? for decoding to make emergency blades

p1et
20th March, 2019, 05:21 PM
As far as I know all DS use VA6 lock.

Jimalex
20th March, 2019, 05:22 PM
You could try this procedure from IQ

Remote coded during the key programming procedure but must be synchronised as follows:
Ignition OFF
Remove key from key reader
Close all doors
Insert remote key into the key reader
Ignition ON
Ignition OFF
Remove remote key from key reader
Immediately press and hold any button on the remote control for at least five seconds
Repeat the procedure for all remote keys to be synchronised.
You MUST (re)program the original working remote control key (if you have any) first.

sdnatlst
20th March, 2019, 05:26 PM
Thanks for all help, i think i will try this, its worth the risk :D i will report

HeXeN
20th March, 2019, 10:34 PM
You can unlock 7945.

p1et
21st March, 2019, 06:58 PM
Thanks for all help, i think i will try this, its worth the risk :D i will report

Keep us informed, good luck :)

sdnatlst
26th March, 2019, 06:29 PM
Keep us informed, good luck :)

hi p1ete,, glad to report, lonsdor worked perfectly, all proxy functions and remote worked after programming :D

R2D2R2
26th March, 2019, 11:59 PM
hi p1ete,, glad to report, lonsdor worked perfectly, all proxy functions and remote worked after programming :D

and need remote control synchronize ? Or just need immo program for proxy key work ?

sdnatlst
27th March, 2019, 10:05 AM
no sync needed like above, no