PDA

View Full Version : Versys 2017 need 9000 km



giustyle
20th March, 2019, 10:56 PM
Can you help me to decode this file?


original 16300 around

i need

9000 km


i hope is ok, 93c66 chip

Thanks very much!!

jomberykaso
21st March, 2019, 01:32 AM
Original mileage is 16.384 kms
New mileage is 9.000 kms

Good Luck!

chris781
21st March, 2019, 01:32 AM
......................

giustyle
21st March, 2019, 06:46 AM
Write memory don't work.. this is error:

605683

Is the problem me or file?

Thanks

nikz
21st March, 2019, 07:20 AM
orig file bad...................

giustyle
21st March, 2019, 07:45 AM
Are you sure? now I unchecked this flag "Code Memory" and the program is done correctly

605694

Now I will connect to my Moto for verification :D

I hope it's work..........

Diagcar1
21st March, 2019, 08:36 AM
Your data is not good, this is never going to work.

mikkhh
21st March, 2019, 09:09 AM
here is dump from same kind of bike, worked 100%

giustyle
21st March, 2019, 10:04 AM
Your data is not good, this is never going to work.


You are right :( i don't see change in my cluster..

605727

I extracted the new file, is correct this?

giustyle
21st March, 2019, 10:24 AM
here is dump from same kind of bike, worked 100%

Thanks but i think that if i not reading good... even the writing will not be good.

And i need.. 9000 km around

giustyle
21st March, 2019, 10:57 PM
This is good?????



Can your help me? i need to 9000 km around :)

Thankssss!

frankrayk
21st March, 2019, 11:13 PM
This is good?????



Can your help me? i need to 9000 km around :)

Thankssss!

Still not good, you have to read in 16bts.

giustyle
21st March, 2019, 11:17 PM
Still not good, you have to read in 16bts.

this is a 16 bit... its good?? :)

frankrayk
21st March, 2019, 11:54 PM
Now it's good, here 9000

giustyle
22nd March, 2019, 01:10 AM
606004

606005
Finally work it!! The problem was 2:

- Pin 8 NOT connect (only pin 1-2-3-4-5)
- Read and write to 16bit (ST93C66 x16)

Programmer TL866CS made in china ( south China ) :D

Thanks @frankrayk :)

Thanks all!!!