PDA

View Full Version : Sprinter W906 EZS



Cesarec
23rd March, 2019, 02:29 PM
Hi,
Can somebody help me with mileage for MB Sprinter W906 year 2017.?
I read EZS by VVDI Prog but Nyo don't recognize mileage in this this dump.
VVDI MB recognize keys in this dump.

Current millague is 364967km and I need 90.000km.

Thanks in advance!

clusters
23rd March, 2019, 02:39 PM
here................

Cesarec
23rd March, 2019, 02:41 PM
Thanks mate, it works!

Cesarec
21st December, 2019, 01:06 PM
Hi mate,
Please help me with mileage for MB Sprinter W906 year 2016.
Current millague is 450075km and I need 220.000km.

Thanks in advance!

Cesarec
21st December, 2019, 02:01 PM
I solved it.

telina
28th February, 2020, 08:28 AM
hello!

please help me to change mileage on my vw crafter 2011. my mileage ori is 296903 mk and i want to change on 151000 km.

thanks for your help

Cesarec
28th February, 2020, 12:45 PM
hello!

please help me to change mileage on my vw crafter 2011. my mileage ori is 296903 mk and i want to change on 151000 km.

thanks for your help

I think that your dump is not good, read it again.
BR

telina
28th February, 2020, 05:12 PM
hello my friends,


yes, i m sure too that my dump is wrong despite my successfull reading. It's the same algorhytme with MB sprinter.
i send you the picture of EZS and the reading selection on vvdi prog.
Maybe i didn't make the right selection on my vvdi prog.
when I do READ ID, it comes to me IC:C411 but this one corresponds to several MASKS so I don't know what is the correct MCU reference in the EZS

thanks

icogsm
28th February, 2020, 05:22 PM
you mask is 1L15Y
b.r.

Cesarec
28th February, 2020, 06:02 PM
MC9S12XDP384 1L15Y

Cesarec
28th February, 2020, 06:08 PM
Connect it like w906 but read and write it with vvdi prog like MCU 9S12XDT384 SECURED
BR

leandroks
3rd April, 2020, 08:52 PM
Hi guys could anyone help on calibrating odo from a w906 2016 ezs a9069004100 sprinter??
It has 437328km and i need 257200
thanks in advance


BR

Leo

jomberykaso
3rd April, 2020, 09:12 PM
Hi guys could anyone help on calibrating odo from a w906 2016 ezs a9069004100 sprinter??
It has 437328km and i need 257200
thanks in advance


BR

Leo


.........................................

leandroks
6th April, 2020, 07:05 PM
Hi mate, your dumps was ok. car starts and shows right mileage. after 30 minutes carr stopping starting. i write back original ezs dump and car starts ok.
Any idea??

jomberykaso
6th April, 2020, 07:13 PM
My files are good.....maybe you need to sync

leandroks
6th April, 2020, 07:25 PM
to synch it via obd2?

Krystianek28
29th September, 2021, 07:20 PM
Hi mate,
Please help me with mileage for MB Sprinter W906 year 2014.
Current millague is 321xxxkm and I need 120xxxkm.

Thanks in advance!

lukasz12345
29th September, 2021, 10:15 PM
Your odo 325882?
Where is your dash?

Dash set to 0km

Krystianek28
30th September, 2021, 05:07 PM
Thank you !
Everything is OK,

Krystianek28
24th January, 2022, 06:38 PM
Hi,
Please help me with mileage for MB Sprinter W906 year 2016.
Current millague is 1000116km and I need only 116km.

clusters
25th January, 2022, 11:45 AM
Hi,
Please help me with mileage for MB Sprinter W906 year 2016.
Current millague is 1000116km and I need only 116km.

Here you go.

autocargo
14th November, 2022, 05:27 PM
Hello. Sprinter 2014 esz... Need about 420xxx km. Hope someone can help. Now there's about 585xxx km... Thanks in advance.

Done it. Found all info on Tachosoft software. Seems to be OK.

brend
14th November, 2022, 07:14 PM
Hello. Sprinter 2014 esz... Need about 420xxx km. Hope someone can help. Now there's about 585xxx km... Thanks in advance.


Done it. Found all info on Tachosoft software. Seems to be OK.



3X .........

59 45 66 (HEX) 5850470 (DEC) replace to 40 16 40 (HEX) 420000 (DEC)